• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Bullet Moulds

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Jun 22, 2022
Messages
15
Reaction score
23
Location
UK
Just a brief mention that I am able to provide to order Conical Bullet Moulds via this Forum or from my Ebay adverts. (LEM Bullet Moulds)
Current Moulds available; Martini Henry (Carbine and full weight), Monkey Tail, Cylindrical Whitworth, P.53 .550", .568" Pritchett, .590 Snider., .730" P42 Sea Service.
Due to making Moulds since 1965 I have extensive Tooling for other Calibres, please ask!
Current lead time to supply 14 Days from ordering, can ship anywhere in the World, typical Mould prices start from £60, Postage £3.50 UK, £18 USA. AUS.
Can also offer "Bespoke" service and can help out with Moulds suitable for casing, the brass Monkey Tail is an example.
Have been known to supply large diameter Cannon Ball Moulds in Cast iron too!
The large Ally Mould is for a "2" Conical Cannon, last pic is of my current Monkey Tail as per Ebay. (The hex Bullet has been pushed through!)


Should you wish to purchase directly from me I can offer a discount :)

Hexagonal Whitworth will be available once again from me soon!!
 

Attachments

  • IMG_20201119_171700.jpg
    IMG_20201119_171700.jpg
    150.9 KB · Views: 5
  • IMG_20201119_171857.jpg
    IMG_20201119_171857.jpg
    84.2 KB · Views: 0
  • 20201124_133504.jpg
    20201124_133504.jpg
    134.3 KB · Views: 0
  • 20201212_150119.jpg
    20201212_150119.jpg
    181.2 KB · Views: 0
  • 20200930_125432.jpg
    20200930_125432.jpg
    75.3 KB · Views: 0
  • 20200605_212001 (1).jpg
    20200605_212001 (1).jpg
    152 KB · Views: 0
Last edited:
Maybe it is advertizeing but I know this maker & his mould making father before him , both legendry figures in my book & Iv'e a bought LOT of their moulds over the last 50 years if that endorsment is any good for members ,
& I have no commercial link with either other than as a satisfied customer . Regards yours faithfully '
Rudyard
 
Curiously the previous three posts didn't feature in the Mould makers intro However he seems to have put out a good intro .
Rudyard
 
Status
Not open for further replies.
Back
Top