SOLD .58 T/C BIG BOAR barrel

Help Support Muzzle Loading Forum:

Status
Not open for further replies.

Grimord

Fyrstyk
MLF Supporter
Joined
Apr 9, 2014
Messages
798
Reaction score
169
Location
SE CT
Percussion barrel 26" long, 1:48"twist, 1" across the flats. In good shape, minor pitting around the nipple bolster. $225.00 plus shipping.
 

OldRust

40 Cal
MLF Supporter
Joined
Dec 12, 2018
Messages
113
Reaction score
34
Location
Pennsylvania
I believe it will also fit the TC Hawken .54 cal stock. They are 1" barrels
 

Grimord

Fyrstyk
MLF Supporter
Joined
Apr 9, 2014
Messages
798
Reaction score
169
Location
SE CT
I have an update for this barrel. The rear sight is a T/C adjustable, but the front sight is ?. I got this barrel off of a gun I traded for. There seems to be some light rusting in the grooves visible at the muzzle, but nothing that a brush with some oil soaked steel wool won't remove. A flexible (fiberglass?) ram rod is included. Here are a few pictures. I am not a good photographer. First I'll take it gets it.upload_2020-1-22_18-57-13.jpegupload_2020-1-22_18-56-56.jpegupload_2020-1-22_18-56-40.jpegupload_2020-1-22_18-56-18.jpeg
 

bubba.50

54 Cal.
Joined
Aug 21, 2010
Messages
1,971
Reaction score
179
I think you might have to shorten the barrel under rib a bit for it to drop into a Hawken stock.
The fore-ends were the same length but with T/C’s lack of quality control sometimes the rib would bump the stock, other times it’d leave a little gap. The same could happen if ya switched a half dozen Renegade barrels back & forth or a bunch of Hawken barrels.
 
Status
Not open for further replies.

Latest posts

Group Builder
Top