• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD .54 TC Hawken 1" barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Feb 26, 2018
Messages
462
Reaction score
632
I have several TC Hawken rifles. Looking to sell a couple to buy a custom kit. This is a .54 caliber 1 inch barrel I recently refinished. Draw filed the barrel so to remove the BP warning and then browned it with LMF cold brown. Installed a fixed rear sight. Barrel is in excellent condition and shoots better than I can. 300 shipped. No issues with the stock.
 

Attachments

  • 20190320_122259.jpg
    20190320_122259.jpg
    227.3 KB · Views: 276
  • 20190320_122310.jpg
    20190320_122310.jpg
    146.8 KB · Views: 248
Nice work.
Few questions, if you don’t mind:
What type buckhorn sight did you install? (Looks Good!)
Did you remove only the BP warning or ALL the “modern” lettering?
The stock was not refinished, correct?

Thank you!
Jim
 
I got the sight from the gun works, removed just the warning junk, left all the lettering on the lock side. I did remove the gloss finish and applied Danish oil to finish it.
 
Status
Not open for further replies.
Back
Top