.54 sizing die

[MTFURY]

I would like to buy a .54 sizing die for an RCBS lubesizer so I can size the mini-balls I pour for my .54 caliber hawken. Anyone know where I can get one, I can find lots of them up to a .52 cal but nothing bigger.

 

[bang]

Depending on how many calibers you have a sizer can be easily made.
I use 3/8 fairly hard metal, drill appropriate hole then use an adjustable reamer to bring it to the size I need. Use drill press to push through die.

 

[hawkeye2]

https://www.lodgewood.com/Lubrisizer-Sizing-Die_p_509.html
North East Trade Co. has different styles of dies but none for Lubesizers.

https://www.northeasttradeco.com/online-store

 

[barracudadave67]

S & S Firearms, and Lodgwood MFG, both have lube sizers listed for Lubrisizers.
But you had better know what diameter you need for your bore, or it will all be for naught. They come in different sizes, in .001 increments.
That is if they have them in stock.

As mentioned, North East Trade Co.. has push thru sizers that you can mount in any loading press, with 7/8th 14 threads.

Dave

 

[MTFURY]

Thanks for the info. I contacted Northeast Trade and ordered a die. Thanks again everyone. Great forum site!!!!!!!!!!!!