• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

CLOSED 50cal LYMAN plains Bullet mold

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
I suggest looking at accurate molds.com I ordered the 50 caliber 50-400W and am really pleased with the accuracy.
20210131_183225.jpg
 
Thank you for the information If you don’t mind me asking what barrel (twist rate and make) are you using?
 
The Lyman boolit was too tight for my T/C High Plains Sporter, it dropped from the mold at .508. I bought a plain base mold from NOE for the .500 S&W that drops .504 and it shoots lights out and you don't have to hammer it in. It's listed as a .502-404-SWC. Mine weigh in at 410gr out of straight lead.
 
Status
Not open for further replies.

Latest posts

Back
Top