alcessapiens
40 Cal
Had this around for awhile, was rusty on the outside but packed full of really greasy rags so the bore is better. I cleaned it up, draw files and cold blued it to see how it’d turn out. There was some pitting but it filed out. I stippled the topflat and pulled the breech plug. Seems about ready to go. This is a fairly tight bore so a .437 and patch might be wanted. My bore light doesn’t seem to fit well. The bore is nothing to write home about but then it might not have been when new. A good polish is in order. $80 + shipping. Tossed in some bits from a parts bin I’ll not likely be using. Steel trigger guard, trigger, wedge plates. Brass toe plate.
Attachments
Last edited:
