Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
On a 45 CVA Model #1. what holds the two barrel retainer clips from falling out ? ID Notes: Made in USA marked barrel; patchbox installed with 4 screws; thimbles are hexagon; hardwood ramrod has pewter-type ends.
You may have to play with slightly bending the wedges to tighten things up. I open a vice and lay the wedge over the opening and tap it with the ball end of a ball peen hammer.