cutcheon01
Pilgrim
- Joined
- Aug 10, 2009
- Messages
- 9
- Reaction score
- 2
I’m interested in a .40 cal barrel for my Seneca. Any available or do I need to build one?
Thanks much
Jamie
Thanks much
Jamie
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
.40 cal Seneca
- Thread starter cutcheon01
- Start date
Help Support Muzzleloading Forum:
DOUBLEDEUCE 1
69 Cal.
- Joined
- Jan 25, 2008
- Messages
- 4,143
- Reaction score
- 827
I would check to see if anybody makes a drop in replacement.
I haven't been able to find one. I've been thinking about contacting Bobby Hoyt and seeing if he could rebore a .36 caliber... probably easier than collecting all the necessary parts to build my own, but then easier isn't necessarily the way to go...
Bobby rebored a 32 Cherokee barrel to .40 for me and it shot very well. Sold it as I am getting rid of most of my guns but was very pleased with the results. If I were you I would see if anyone has a 36 Barrel for a Seneca with a rough bore that could be re cut. Senecas were most common in 36 and 45 so there is chance someone has one that would work.
cutcheon01
Pilgrim
- Joined
- Aug 10, 2009
- Messages
- 9
- Reaction score
- 2
Thanks for the replies.
