• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

L & R
Shop deals on ebay
muzzle loading side side shotguns
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    First build finally complete!!!!!!!

    Very nice!
  2. D

    Triangle two sided file??

    Brownells sells a 60 deg. sight base file that has 2 safe sides. (Sorry no link- I'm on my tablet.) Most builders it seems just grind one side smooth on a regular 3 sided file. That's the route I took too. Good luck!
  3. D

    Most Recent TOTW order

    You should see how they act when your 3 pound package of bees arrives at the Post Office! :rotf:
  4. D

    Touch Hole 'Speriment

    Wow! Thanks for that 22fowl! I'll give him a call when I get started on the next one. That sounds like the way to go!
  5. D

    Touch Hole 'Speriment

    Blackbruin- $30.00 is VERY reasonable! I will check into that. WKD- that picture is misleading... the center of the touch hole is actually just shy of .150" in front of the plug face. I fit the plug myself, and it ended up right at .450" deep, then when I marked and drilled the vent, it's...
  6. D

    Touch Hole 'Speriment

    Rifleman1776- As I mentioned in the first post, this is my first go round with a flinter so really my picking the flash hole maybe wasn't what it needed. I was just trying to get it to go off and was trying everything I could come up with. Does high humidity cause this? I have been in the habit...
  7. D

    Touch Hole 'Speriment

    Grenadier- after reading what seemed like lots of bad experiences with touch holes that are coned on the outside along with reading a lot of posts that report dependable ignition only after going to an internally coned touch hole liner, (White Lightnin' seems to be a favorite) it's just that I...
  8. D

    Touch Hole 'Speriment

    I completed my first flintlock earlier in the fall, and started out with a straight 1/16" (.0625") drilled touch hole. It worked, but after just a few shots was completely unreliable for consistent ignition. So the next step was to go to a #50 drill (.070") which gave pretty well the same...
  9. D

    Confused about measuring powder

    Hello SteveKY! Have you tried Paducah Shooter's Supply? I called down there about 2 or 3 months or so ago asking about black powder and was told at the time that they had it. Shooters is a 45 or 50 mile each way trip for me and I never got around to getting down there to pick any up though...
  10. D

    Another ky howdy

    Hello and welcome from the other end of the state!! I'm a fairly new arrival here too, and I have to say that this is a good place to learn from some pretty sharp folks. Dave. :thumbsup:
  11. D

    This woman's crafts (a few)

    Excellent work! I'm with Artificer: my favorites are the pack basket and the pine needle basket.
  12. D

    Best place to buy parts?

    +1 for Track...
  13. D

    New wood for Lexington Ky rifle....

    Wes/Tex, That cat looks like he's trying to figure out the best attack angle to scalp the varmint what put him in that costume!! :rotf: The cap does match his fur pretty good though...... :wink:
  14. D

    wooden vise jaws

    Here's what we use. I had seen variations of these for years but couldn't find a set to fit this vise. I did see a similar set on the internet somewhere and decided to make my own. I drew them up using Inkscape and had my son cut them out of some 18 gauge sheet metal on the plasma cutter that we...
  15. D

    "Old Man" Jack Hinson

    Hello Kodiak13- I don't know for sure, but would like to point out that there are pictures of the rifle in the book, and the rifle itself has been present at some of the book signings.... while the general public could get close to- but not handle the weapon, it would be easy to believe that...
  16. D

    Ladies Rifle

    That is a sweet looking little rifle! Good choice on the Honey Maple finish. The sunshine, palm trees, and what looks to be a blooming fruit tree that are also in the picture looks pretty good too!! :grin:
  17. D

    Renegade barrel with QLA...what to do ?

    Hawkeye2- I'm a newbie, and was seriously scratchin' my head as to what a QLA was too! I did a little google-fu though and see that it is/was a type of muzzle treatment that T/C offered (offers?) that looks to be a short counterbore of about the diameter of the bottom of the grooves for a...
  18. D

    Squirrel rifle

    I really like it- you do good work!
  19. D

    Squirrel rifle

    Congratulations!! That is NICE!!! :bow: Would you mind sharing what finish you used on the wood? I really like the darker stain (aquafortis?) without too much gloss over it. Oh! and some more pics wouldn't hurt anything! :grin:
  20. D

    Help: Source for Small Scraper

    Eric Krewson said: "I make them out of concrete nails, easy and kinda' fun. You will have a dozen or so different ones before long." Thanks for that tip Eric! I was needing a couple of concrete nails to use for patch box latches anyway. After I saw your post I got busy and now have a pound of...
Back
Top