• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

L & R
the hawken shop
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    where is Stumpkiller

    been gone for a while because I did not like the new set up, looks like it changed so may be back but where is Stump killer, miss his threds.
  2. K

    Rusty cellar find

    make sure that's it's not loaded
  3. K

    Pedersoli SxS 10ga bead

    take the front sight off , tap for US thread and buy all the beads you need.
  4. K

    Frosty Barrel

    jag is to tight, should go down easy and clump up behind jag on the way back out. FIRE LAP BORE WITH JB BORE PASTE as stated here many times before, I've done it works good.
  5. K

    My Cabelas hawken .54 pitting in the grooves?

    Put some JB BORE PASTE on your patches with your lube and shoot it, slick the bore right up.
  6. K

    Lee,Lyman,or RCBS which mold?

    I use lee, I buy both sizes 5 and 10 under bore size that way I always will have a patch combo to fit. Two moulds 45 bucks that's half of the price of the other two and do the same job. My center fire is all lyman or rcbs they are better moulds.
  7. K

    early virginia update

    Very very nice, will be beautiful when done.
  8. K

    My Lyman GPR Misfires

    Don't tighten the lock to tight with the lock bolt, you might be binding it.
  9. K

    First T/C Hawken

    I would try a .014 to .018 patch, lube can be anything but a petro base. Spit, olive oil, I like pure neatsfoot oil, Crisco, ect.
  10. K

    Damascus patch knife

    Where can I get one, looks real nice.
  11. K

    Should I jump on this Hawken.

    buy it and do what needs to be done. B hoyt can refresh or rebore to new.
  12. K

    D M Dolliver

    Track has other threads than what chambers has, sometimes you just have to think a little bit and work around some things.
  13. K

    D M Dolliver

    Is your vent coned on the in side so that it is thin at the face(like a white lightning) or a long hole? If you can cut a slot in it must be pretty thick, I say get a new liner (WL)very easy to fit, you've had the plug out so no problem with that.
  14. K

    D M Dolliver

    Just fixed a problem like this, removed plug and vent. Plug had a trench ground in it to try to get to the vent didn't even line up. Put barrel in miller with plug back in and bored through vent to cut a channel in plug face, new vent installed no more misfires and fast. The org builder didn't...
  15. K

    Antonio Zoli Harpers Ferry barrel?

    Send it to Bob Hoyt and have him sleeve it to 54 cal, no refitting a new barrel, just put back in the stock and go shoot.
  16. K

    Windage screw for TC Hawken?

    see if you can get what you need at a gun shop, contender sights are the same.
  17. K

    testing Skychief's special load

    I think that the heavy wad up front keeps the shot in a clump and does not allow the shot to rattle down the bore with nothing to slow it down.
  18. K

    The talent, do you have it? Find out?

    Talent to me is starting with a 3 ton block of granite and ending up with a stature
  19. K

    Converted Percussion Hatfield to Flint - issues

    810 posts and you can't figure out that maybe your flash hole is to small?
  20. K

    Pennsylvania percussion rifle problem

    I use PURE neats foot oil, little wet no problem with fouling, many shots, loads great.
Back
Top