• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Search results

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. G

    Lyman rear sight ?

    On a GPR, I removed the little spring in the rear sight, reinstalled the screw. Screwed it down tight to make it a fixed sight. Had to shim one side. Applied red loc tite to the cross pin and the perimeter of the sight in the base. Works for me. I did need to lower the front sight height a...
  2. G

    What lock? Davis Colonial

    18th Century Artisan's Show Carlisle Expo Center Carlisle, Pa. February 2-February 3, 2024 Last edited: Jan 9, 2024 Like Gift Supporting Quote Reply Report G
  3. G

    Question about GOEX/Hodgdon

    THE GOEX STORY GOEX is a proud American business with a rich history. In 1802, E.I. Du Pont de Nemours broke ground on his original black powder plant along the Brandywine River in Delaware. To meet the growing demand for black powder, E.I. Du Pont de Nemours began construction on the Belin...
  4. G

    Spring compressor (cramp in English gunsmith terms) for Lyman Deerstalker.

    Track of the Wolf: TOOL-VISE-COIL Coil Mainspring Vise, to safely compress a coil mainspring. Price: $13.99
  5. G

    Davis triggers

    Remove the two trigger guard screws, pull off the trigger guard. Remove the one screw at the rear of the trigger assembly and pull off the assembly. Put in the Davis trigger assembly. Reinstall the single factory screw. Reinstall the trigger guard and screws. You are done. Some of us have found...
  6. G

    Trigger &metal ?

    From the Davis website: We believe Davis triggers are the finest on the market today. They have heat-treated steel triggers and mild steel plates. The bars can be cold bent slightly to match the stock contour. However, before bending the triggers, they must be heated to a red heat. The sear tips...
  7. G

    1/16th touch hole

    If you can find a nut of the correct size, screw the liner into nut, insert the nut into the vise, and drill the liner 1/16. Worked for me.
  8. G

    50 PRB speed over a chrono

    I ain't no expert but I suggest you reconsider the weight of your .495 roundball stated in your post.
  9. G

    Lyman GPR flint breaking

    GPR typically takes a 5/8" x 3/4" flint.
  10. G

    Sgt. York Targets

    V Target This target is found on the Gemmer Muzzleloading Gun Club website. You will need to open a link if you click on the above.
  11. G

    Rifls case

    https://uniquecases.com/product/53-musket-case I have the 53" Musket Case for my 32" barreled Lyman GPR. It is well made modern case. Price has about doubled at $65 since I purchased mine.
  12. G

    Bottle for cleaning solution

    I recently picked up a two pack of small spray bottles at a Michaels craft store: Spray Bottles by Recollections™, 2ct. $4.49 They hold 2 fluid oz. each.
  13. G

    Purpose of finger rest on bottom of trigger guard ?

    I wish my GPR had that finger rest.
  14. G

    Can I open this rear sight up and how much is normal?

    Go slow with that file on the front sight. You may not need to remove as much height as you may think you do.
  15. G

    GPR frizzen spring

    Contact Dixon Muzzleloading Shop. They are a Lyman Warranty Shop and maintain a stock of parts.
  16. G

    What Muzzleloading Stuff Did You Do Today?

    Tried a diamond bit in the Dremel on some humpy flints. I am satisfied with the results.
  17. G

    Enlarging touch hole

    Have you set the breech end of the barrel in hot soapy water. That may loosen any fouling holding the liner and allow removal of the liner. If that fails, I would try kroil to seep into and around the liner threads. Kroil is good stuff.
  18. G

    Dutch Schultz

    Thanks for the update.
  19. G

    What is Wrong in this Picture?

    It appears the leather/flint are not back far enough: ie. against the jaw screw. If need be cut or punch a hole in the leather at the screw in order to set the flint back further. If that is the Lyman provided cut flint, be advised that they suck.
Back
Top