.2'' , 2/10th of an inch I would think, should be of room for a touch hole liner.
45 flint project pistol, barrel is cut down to 10'' from discarded rifle, the stock is TOW partial inletted #3 maple, lock will be the old clark...
the same thought came to me on the depth of the breechplug.
I shot my 42" at clays coming out of a skeet house and it was slow to swing and lead the clay. so I would say 36 would be a better gun for that...
old ugly and some other tall white guy.
Is there any typical colour the original tarps were painted?
I’m thinking about powder to mix with the linseed oil, will cement colouring powder...
looks real good.
rhubarb originated in china but am not certain as that is what I learned in school and I don't trust teachers.
this what I got from home hardware. once its all soaked in I think I will try mixing in some beeswax for the final coat as suggested above.
its just a flat side.
is the barrel rifled? did you turn it round or did you buy it that way?
ready for the dye
its not fancy but its finished. treen plate
making another belt pouch.
here it is,what I call finished, as round as I could get it by hand and no lathe. I figured that round was probably the best way to go.
haha! dinner plate. hand gouged, it will most likely end up round.
I used my spoon gouge to hollow it out by hand.
I think from what I’ve seen on the net plates were mostly round by my time frame. So I will...
So far. With spoon gouge
I have been searching mr. google but then thought you folks have more info than him.
I have a nice pc of oak,12x12x1to make it from. it will...
Separate names with a comma.