Search results

Muzzleloading Forum

Help Support Muzzleloading Forum:

  1. JRBCo.

    SOLD Neck Knife with Sheath

    Handcrafted neck knife made out of high carbon steel. Blade is approx. 3 1/2" long by 1" wide and 3/32" thick. Blade has been mildly aged. Maple handle scales were used and secured to blade with 1 brass and 2 mosaic pins and epoxy. Overall length is approx. 6 5/8" long. Sheath is made out of...
  2. JRBCo.

    FOR SALE Price Increase: Camp or Belt Knife now with Sheath

    Handcrafted knife made out of high carbon steel. Blade is approx. 8" long, cutting edge 7 3/4" long. Blade is approx. 1 1/4" wide by 3/32" thick. Thinner handle is oak and is secured to blade with 3/16" brass pins and epoxy. Has solid brass bolsters. Overall length is 12 1/2" long. Made a...
  3. JRBCo.

    WITHDRAWN Belt Knife with Sheath

    Handcrafted knife made out of 1095 HC steel. Blade is approx. 6" long by 1" wide and 1/8" thick. Blade is secured to deer antler with steel pin, epoxy and poured pewter bolster. Blade and antler has been mildly aged. Over all length of knife is approx. 10 3/4" long. Center seam sheath is made...
  4. JRBCo.

    WITHDRAWN Belt Bag with Knife

    Belt bag and knife made by yours truly. Bag is approx. 5 1/2"x 7 1/2" and flap is approx. 8" wide. Bag will accommodate a 3" belt. Cowhide leather was used and is mildly distressed and aged. Knife is made out of high carbon steel. Blade is approx. 3 5/8" long by 1" wide and 3/32" thick. Blade...
  5. JRBCo.

    SOLD Russell Green River Knife with Sheath

    Sorry. Forgot to list this knife as sold. Than You Youngblood.
  6. JRBCo.

    WITHDRAWN Belt Knife

    Belt knife with sheath for sale. Blade is made out of 1095 HC steel. Blade was quenched in oil and triple tempered. Blade is approx. 5" long by 1" wide and 3/32" thick. Blade has been mildly aged. Blade has been attached to deer antler with epoxy, mild steel pin and hand poured pewter bolster...
  7. JRBCo.

    WITHDRAWN Pack Hatchet

    Nice little pack hatchet with sheath for sale. The blade was made from an antique sawmill blade. The blade was oil quenched and triple tempered. The cutting edge is approx. 2 1/4" and is approx. 5/32" thick. Overall length is approx. 9 3/4". The blade has been mildly aged. The handle is made...
  8. JRBCo.

    Pedersoli Flintlock kit

    I ordered this Pedersoli Kentucky Rifle flintlock kit along with a Pedersoli Kentucky Pistol flintlock kit, both in 45 cal. From Dixie back in April of last year. It only took about 10 days to receive both. Really happy with Dixie's service. My original plan was to order the components from...
  9. JRBCo.

    SOLD Hand Crafted Belt Knife

    Nice little belt knife made out of 1095 HC steel. Blade measures approx. 6" long by 7/8" wide and 1/8" thick. Blade has been mildly aged. Deer antler handle is secured to the blade with epoxy, mild steel pin and poured pewter. Handle also has been mildly aged and sealed with hand rubbed wax...
  10. JRBCo.

    SOLD Russell Green River Knife with Sheath

    This is a Russell Green River Ripper Knife. I started with a blank and added the maple scales and brass bolsters. The blade is approx. 4" long by 7/8" wide by 3/32" wide. Overall length is approx. 8 3/8" long. The scales are secured to the blade with epoxy and brass pins. The bolsters are...
  11. JRBCo.

    WITHDRAWN Russell Green River Knife

    This is the Russell Green River Sheath Knife. I started with a blank and added the black walnut scales. The scales are secured to the blade with epoxy and brass pins. Scales were finished with Danish Oil. Blade is approx. 4 1/2" long by 1 3/16" at its widest point by 3/32" thick. Overall length...
  12. JRBCo.

    WITHDRAWN Belt Knife

    Small belt knife for sale. Blade is made out of a saw blade. Handle is maple secured with brass pins and epoxy. Cutting edge is approx. 4 1/4" long, is lightly aged and overall length is approx. 8 1/4" long. Welted sheath is made out of vegetable tanned cowhide and will accommodate a 3" belt...
  13. JRBCo.

    SOLD Neck Knife

    Neck knife for sale. Blade is made out of a saw blade. Handle is made out of maple and is secured with brass pins and epoxy. Blade cutting edge is approx. 3" long. Overall length is approx. 6 1/4" long and is lightly aged. Fairly sharp. Comes with welted sheath that is made out of vegetable...
  14. JRBCo.

    WITHDRAWN Belt knife.

    Pulling knife for rendezvous.
  15. JRBCo.

    WITHDRAWN Coffin Handle Bowie

    Pulling knife for rendezvous.
  16. JRBCo.

    Forged Bowie with Deer Antler Handle

    Just finished this knife yesterday and the sheath today. Rough forged the blade out of an old saw mill blade. Lots of filing and sanding to get it presentable. The blade is 7 1/4" long by 1 1/2" wide and approx. 1/8" thick. Overall length is approx. 14" long. The handle was made from an old...
  17. JRBCo.

    FOR SALE Coffin Handle Bowie

    Offering this Coffin Handle Bowie. The mildly aged blade is approx. 8" long by 1 3/8" wide and 3/8" thick. 1095 HC steel was used. Has a mild steel guard. Scales are striped maple secured with mild steel pins and epoxy. Aqua Fortis was used on the maple. Overall length is 12 3/4" long. Sheath...
  18. JRBCo.

    FOR SALE Belt Knife

    Just finished this knife. Not perfect but a pretty nice knife. Blade is approx. 5 3/4" long by 1" wide and 1/8" thick. 1095 HC steel was used and has been lightly aged. Myrtlewood from the Oregon coast was used for the scales. Aqua Fortis treatment was used. 3/16" brass pins were used to secure...
  19. JRBCo.

    SOLD Rifleman's Knife

    Offering this handmade knife for sale. Blade cutting length is approx. 7 3/4" long. 1 1/4" across at widest point and 1/8" thick. Steel used is 1095 HC. Overall length is just under 14". Antler handle is from a Blacktail buck that my deceased brother killed. Handle is approx. 7/8" across. Has a...
  20. JRBCo.

    More blades

    Just finished this group of blades and sheaths this morning. Been working about 10 hours a day for the last month and a half making knives and sheaths so I have a good inventory for rendezvous and arts and crafts fairs. That is if Covid doesn't mess that up. I have 31 blades completed so far...
Top