Search results

Help Support Muzzle Loading Forum:

  1. ZUG

    An Everyday Tool.

    To the cowboy the revolver was a tool and as such he use it to perform many tasks at hand🤠
  2. ZUG

    Cased Remington New Model Navy.

    Mighty fine looking case there Brian :thumb:. How about a little description on how you made it. It looks very well thought out.
  3. ZUG

    Capandball does it again - compares FOUR C & B handguns.....

    Eras Gone Bullet Molds is the company - the molds are made for him by the Lee Mold Company. I have the three calibers - .31, .36, and .44 Johnston & Dows bullet molds and just ordered the Kerr mold. The molds cast a very nice bullet. I also have the Cap & Ball paper cartridge former for the .36...
  4. ZUG

    I am having one heck of a time finding ....

    Dixon's should be about 1 hour from Sussex county. I use to live in Mercer county and it was a 1.5 hour drive for me.
  5. ZUG

    Barrels Silver Soldered or Brazed

    Try this link <>
  6. ZUG

    Barrels Silver Soldered or Brazed

    The confusion on silver solder and silver braze continues :doh:-- here is a You-Tube video that describes the difference and how this person does it - a very good description - start at time 9:36 in the video <>
  7. ZUG

    Under lugs popped off

    If you did sweating of copper pipe joints with tin/silver solder then it will be no different to sweat on the two tenons that came off. As for their location there should be some remnants of the original location that you can use to locate the tenons to. If not then use the existing tenon to...
  8. ZUG

    Lock Down Leather Work

    You did a very nice job --- The tooling and staining came out just great. It is hand stitched or machine? The stitch spacing is very consistent.
  9. ZUG

    Red residue at muzzle after shooting

    I have had this happen to me on several occasions while shooting my .45 caliber cap lock with 60 gr of 3F Goex. The weather temps were in the high 50's to low 60's clear and crisp. I was told that it was a good thing as my load was balanced and that I was getting the max velocity for that load...
  10. ZUG

    Barrels Silver Soldered or Brazed

    I worked as a mechanical engineer for a well known aerospace company for 44 years and we used that Hysol product a LOT. Mostly it use was for support tooling and fixtures but not on flight items. It has a very good bond strength when used properly. For my money I would not use any epoxy for this...
  11. ZUG

    Gaaah! Help! Can't get stuck ball out

    The first thing I would do is to soak that powder charge to prevent any accidental discharge - as you said - "I am extremely reluctant to fire it. Ball is halfway down the barrel and there was a large powder charge put in first."
  12. ZUG

    Ruger Old Army with Elk Stag Grips

    Yup -- those grips sure do look good😉
  13. ZUG

    Method to solder barrel rib

    Yes -- that's why I noted Stay Brite because of it's properties. Silver braze is high temp stuff - above 1100 degrees and is not considered a solder - below 700 degrees is considered a solder and melts at low temp. A lot of folks don't use the right terms when describing brazing and soldering...
  14. ZUG

    Derringer build

    Very nicely done😉. Dixie Gun works sold a derringer pistol kit back in the early 70's along with fully assembled ones made in Spain (I think). They were cheaply made but were fun to shoot as a novelty item.
  15. ZUG

    Method to solder barrel rib

    I use to rivet on the rib but no more. One went ok and the other the stop collar moved and I drilled into the barrel leading to a trashed barrel. I stopped using rivets or screws since then. I soft solder my ribs on using Stay Brite with their flux Stay Clean. this is how I do it; Ram Rod Rib...
  16. ZUG

    Revolver chain fires

    You got the wrong Hepburn --- try Katharine Hepburn ----
  17. ZUG

    Plains Pistol pewter foreend cap

    I have used clay and heavy paper to cast nose caps and had the clay melt and run all over the gun. It was a mess to remove.
  18. ZUG

    Gas Cutting the Arbor of the 1860 Army

    I'd clean it up with a file & emery paper and leave it alone. I'd also buy a new gun and shoot them both. When the first one bites the dust save it for parts if any are worth saving.
  19. ZUG

    Wild Inaccuracy with Pedersoli P53 Enfield.

    First off you HAVE to find out what the bore diameter is - without this info you are just guessing as to what minie will perform well. I have three repo CW rifled muskets - 1853 3 band, 1861 Springfield and a 1863 Zouave. The all measure 0.003" of one another -0.579" - 0.582". I purchased some...
  20. ZUG

    Washing Pillow ticking

    DON'T cut it into strips leave it intact as purchased. If you cut it into strips you will end up with a bunch of loose strings and a mess to untangle.
Top