• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Some "Wrap & Weld" forging pics

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 29, 2010
Messages
35
Reaction score
0
This is one of/if not the most traditional way tomahawks/trade axes were made. When a smith say's "wrap and weld" this is what they mean.
We start with a strap on metal(in this case a farriers rasp), cut off the 10" long and folded over on itself. You can also see a wedge shaped chunk on 1095 laying there for the cutting bit.
newpics002.jpg

Next we see the hawk roughly formed with the bit between the cheeks.
newpics003.jpg

Next we see the hawk being heated for its first welding pass. We use straight borax for flux. You can see the hawk under the coke there if you look.
newpics005.jpg

heres another pic of a different hawk like this one being welded in a "beehive" fire...
Picture174.jpg

This is the hawk after the first welding pass. Not completely welded but on its way.
newpics006.jpg

To me this is an important step. We forge in the notch. It could easily just be ground in but when you forge in a notch you know right then waht kind of weld you have. If its not a good solid weld it'll bust apart in a second. It make be ground out clean later but we always do this step.
newpics007.jpg

Then after forging out the blade we do another important step. Upsetting the blade edge. We hold the hawk with a large pair of tongs while doing this. Someone usually says "You cant hammer on the end of a welded hawk like that without busting it" To which we usually say "If its welded right you can hammer on it anyway you want" Then I get the stink eye :D Anyway, it is another test of a good weld. Draw it back until you have wide enough blade. You have to use a hammer to draw it back because wrapped and welded hawks/axes are lighter and thinner so you need the added control of the hammer. We use a light two pound hammer for this part.
newpics008.jpg

Then clean it p a bit and it will look somthing like this.A simple hawk..
newpics061.jpg
 
wow- that is so cool! makes me want to get out some of my God entrusted, overtaxed dollars and get a forge going!
 
Back
Top