• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Thompson Center 54 Caliber Hawken Barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Dec 23, 2013
Messages
2,520
Reaction score
6,668
Location
10 miles north of Mexico
This barrel is missing a ramrod pipe and the rear sight. The bore appears to be excellent. Some Bubba put a wrench on it an dinged up some corners as shown in the photos. These can be cleaned up with some draw filing since it needs re-blued anyway. If I were going to keep it I would get rid of the one pipe and solder on two newer better looking ones. Asking $150 shipped at my expense.
IMG_6794.JPG



IMG_6791.JPG


IMG_6790.JPG

IMG_6792.JPG


EDIT: 1.00 across the flats. 28" to front of breach plug. 28 7/8" to rear of breach plug.

View attachment 311627
 
Last edited:
What is the measurement from the back of the breech to the center of the lug? I think it may fit my investarm but want to make sure. Also what is the measurement at the flats?
Thanks
 
Status
Not open for further replies.
Back
Top