• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

SOLD EMF Pietta Steel Frame 44 Octagon Barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 24, 2022
Messages
943
Reaction score
678
Location
Texas
EMF 2021 Pietta 44 caliber. Polymer grips, octagon barrel. In good condition. No issues. Cycles as it should. Looks to have not been fired much. Has the original styrofoam box insides. The box was a mess. Managed to save the end. Has some dings and scratches around the wedge. Not uncommon with some people that don't know how to remove the wedge.
Asked $210 shipping included.
 

Attachments

  • 20230601_085827.jpg
    20230601_085827.jpg
    3.8 MB · Views: 2
  • 20230601_085812.jpg
    20230601_085812.jpg
    3.8 MB · Views: 0
  • 20230601_085603.jpg
    20230601_085603.jpg
    2.9 MB · Views: 0
  • 20230601_085609.jpg
    20230601_085609.jpg
    2.8 MB · Views: 0
  • 20230601_085623.jpg
    20230601_085623.jpg
    2.5 MB · Views: 0
  • 20230601_085629.jpg
    20230601_085629.jpg
    2.5 MB · Views: 0
  • 20230601_085714.jpg
    20230601_085714.jpg
    2.9 MB · Views: 0
  • 20230601_085554.jpg
    20230601_085554.jpg
    3 MB · Views: 0
  • 20230601_085548.jpg
    20230601_085548.jpg
    2.6 MB · Views: 0
  • 20230601_085546.jpg
    20230601_085546.jpg
    3.3 MB · Views: 0
Last edited:
Can I see a picture of the bore, please? Pending that, I'll take it.
Here's from the muzzle and the breech. Did you see picture 5 from the top? Not sure why that was done.
 

Attachments

  • 20230601_121107.jpg
    20230601_121107.jpg
    658.2 KB · Views: 0
  • 20230601_121054.jpg
    20230601_121054.jpg
    868.6 KB · Views: 0
  • 20230601_121531.jpg
    20230601_121531.jpg
    1 MB · Views: 0
Hi Jappo.
If .451 ball shears on the chambers then it has the Pietta typical diameter.
That would make it a good piece.

By the way, the metal removal on the right side of the rear of the barrel appears to have been done in providing some clearance for loading bullets longer than round ball.
 
Status
Not open for further replies.
Back
Top