• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

A Sharps project

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Phil Coffins

69 Cal.
Joined
Dec 7, 2017
Messages
3,337
Reaction score
9,551
Location
Colorado
At a collector’s show I found an original1863 Sharps carbine in my price range (modest) that has a good bore and it’s all there and working. Even the priming system is working. What knocked the price down is all the parts had been blued. Fortunately all the markings are clear, not buffed out like many I’ve seen. My intention is to restore it as close to right as I can by doing a proper color case hardening on these parts (except the barrel of course) and a bit of work on the wood. Any student of Sharps will easily recognize it as refinished but it will look as close to as issued as I can get. A set of lead jaws to hold the barrel needs to be cast so the barrel can be removed then all the parts for color case can be annealed before each gets touched up. Photos and targets in the future.
IMG_0369 by Oliver Sudden, on Flickr
 
Keep us posted on your progress.

Real case hardening has been on my bucket list for a long time.

Need to gather up the ingredients and get busy.

My ceramic kilns should work as a heat source.
 
Looks great.

Did you high polish the pieces prior to the treatment?

Care to share materials used and sources for purchasing.

Thanks.
 
Looks great.

Did you high polish the pieces prior to the treatment?

Care to share materials used and sources for purchasing.

Thanks.
High polish would be Inappropriate as I wanted to match the finish it had originally. 320 grit was as fine as I went after draw fileing some select spots of pitting. There’s plenty of pits still on most of the parts.
Brownell‘s had everything needed from furnace to charcoal, even got basic instructions from them.
 
The lever latch spring was broken and the lever latch was messed up. I found original Sharps parts at Dixie and was very pleased with them when they got here, installed them and thought some would be interested in them. Note how the screw head is polished and fire blued originally. The lock is shown to show how perfectly the sear and tumbler are matched even on this war time production. I’ll have an assembled photo soon. The bridle is the original color case and the lock plate and trigger bar is my work.
IMG_1007 by Oliver Sudden, on Flickr
 
Back
Top