• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Jug Choke Info

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 2, 2020
Messages
45
Reaction score
36
I am building a 10-bore New England fowler and am going to jug choke the barrel. My question is what angle/taper should I cut on the breech and muzzle ends of the jugged section? I am thinking that it should taper at about 0.030" per linear inch of barrel, but that is purely a guess.
 
Well, most of us here are not machinists, so the specifics evade us. That’s why I suggested letting someone els do it.
Again, I’d suggest contacting someone who knows how,
There are several recommendations on those who do jug choking.
Lowell Tennyson, Bobby Hoyt, many more.
 
I did a search just now on my I phone. Typed in Jug Choke. There was a post from years back on American Longrifles forum. Looked like maybe the info you seek may be somewhere in those series of posts. I’m not a machinist so I sent mine out for the work. I respect your wanting to do it yourself. Hope this leads you in the right direction.
 
Back
Top