• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What Muzzleloading Stuff Did You Do Today?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I know enough to not even try. Not everyone has the gifts that are required to build a gun. I can shoot 'em and fix 'em but do not have the patience and skill needed for the wood working.
I may be in the same boat as you are, in terms of building a ML from scratch. I've considered this many times and I have come to the conclusion that I need more woodworking and fine machining skills to attempt it.

Kudos to those that can but this ole boy knows his boundary lines.
 
And today I did the rear dovetail.

View attachment 208126
I worried if I was weakening the barrel milling a long shallow dovetail in my martini 577 Yes very neatly done on your part , I did one the other day but on third attempt the brass male dovetail was still too loose so added a screw , well done with care

The dovetail cutter was £8 on ebayuk at that price probably from China
 

Attachments

  • image.jpg
    image.jpg
    2.2 MB · Views: 0
  • image.jpg
    image.jpg
    1.7 MB · Views: 0
  • image.jpg
    image.jpg
    1.1 MB · Views: 0
  • E805FAC9-4292-4B49-9EA5-D34F288136C7.jpeg
    E805FAC9-4292-4B49-9EA5-D34F288136C7.jpeg
    947.3 KB · Views: 0
I worried if I was weakening the barrel milling a long shallow dovetail in my martini 577 Yes very neatly done on your part , I did one the other day but on third attempt the brass male dovetail was still too loose so added a screw , well done with care

The dovetail cutter was £8 on ebayuk at that price probably from China
I used a hacksaw and file. Stroke and fit, stroke and fit....
 
Those are some of the more realistic looking polymer grips I've seen. Did you color them with something?
Tom A Hawk, Yes I colored them. They were white when I acquired them from ebay. I used Fiebing leather dye. A mix of Golden Brown and Yellow. I slathered the dye onto the grips and let it sit for a day. I then buffed the grips with a wool cloth. As you are undoubtedly aware polymer doesn't take up much dye, so most of the dye buffed off but enough remained bonded to the grip that it does present a fairly authentic look. The grips obviously aren't authentic fossilized mastodon task but then I also only have about .15c worth of dye invested. 😁
 
We’ll I went shooting today and settled in the load that generated the attached group. I knew I pulled the fourth shot as soon as it went off.
Also, dry balled for the first time. LOL
 

Attachments

  • 349DB6D5-6077-4C4E-AD46-727A4694343D.jpeg
    349DB6D5-6077-4C4E-AD46-727A4694343D.jpeg
    1.9 MB · Views: 0
Tom A Hawk, Yes I colored them. They were white when I acquired them from ebay. I used Fiebing leather dye. A mix of Golden Brown and Yellow. I slathered the dye onto the grips and let it sit for a day. I then buffed the grips with a wool cloth. As you are undoubtedly aware polymer doesn't take up much dye, so most of the dye buffed off but enough remained bonded to the grip that it does present a fairly authentic look. The grips obviously aren't authentic fossilized mastodon task but then I also only have about .15c worth of dye invested. 😁
Well they look good. I used concentrated tea to darken stag and that work really well but you're right about getting anything to be absorbed into plastic.

I made these before the interstate ban went into effect Pardon the unmentionables.

1679435410662.jpeg
 
Relax my friend,don’t get fretful about the little stuff like the spring, remember you ordered a kit not a finished gun .Theres supposed to be some clean up and polishing just not as much Rob did in his build .Have fun with it and take your time and enjoy your build.walt

After being out of the shop for a month on the bathroom remodel it was catch up time. And I still need to finish up a couple of guns that are selling next week.
I can sympathize, I’m torn between working in the shop and doing spring time chores like cutting wood and getting the garden ready for planting. Don’t have the energy for everything any more, but I will continue to persevere.
 
I can sympathize, I’m torn between working in the shop and doing spring time chores like cutting wood and getting the garden ready for planting. Don’t have the energy for everything any more, but I will continue to persevere.
I'm getting that way will be 60 this Sunday it's getting tough to bust ass sun up to sun set. I have joined the professional napping league.
 

Latest posts

Back
Top