Renegade Hammer

I'm looking for an original hammer, mine has been bent for a scope. Thanks

If you do not find one, you can carefully bend it back.

Check here.

https://www.thegunworks.com/custpro...SubCat2ID=11&do=list&Cat1Name=Thompson Center

I didn't see one there but thanks for a new place to look for stuff.

Ebay has plenty. They come up for sale frequently, some with even reasonable prices

Yeah so far I saw one on ebay but it was pretty high.

A little bit heat and it can easily be straightened out. How do you think it was originally bent? Just reverse the process. Or leave as is.

T/C hammers come in two varieties The bent ones have the arched back (low spur), the straight ones have a straight back (high spur)

@Three Mile Farm

https://cfnparts.com/T/C Thompson Center Renegade Muzzle Loading Rifle Parts-680?product_id=13959

I need the high one.

chorizo said:

T/C hammers come in two varieties The bent ones have the arched back (low spur), the straight ones have a straight back (high spur)

View attachment 208272View attachment 208273

Click to expand...

Some hammers are also bent to clear scopes and tang mounted sights. I have a few that look like this.

I seek those out. They have a slightly different geometry to them and work better with musket caps and stand off of the nipple a little more. I posted a comparison of the two in some other thread on nipple clearance.

Both at half cock
\

The one I have is bent to the side quite a bit. I don't care for it and just want one more like it came with. If I don't find one I'll bend it back.

Three Mile Farm said:

The one I have is bent to the side quite a bit. I don't care for it and just want one more like it came with. If I don't find one I'll bend it back.

Click to expand...

Track of the wolf has replacement hammers for the TC’s.

chorizo said:

I seek those out. They have a slightly different geometry to them and work better with musket caps and stand off of the nipple a little more. I posted a comparison of the two in some other thread on nipple clearance.

Both at half cock
\
View attachment 208297

View attachment 208299

Click to expand...

I have a mix of both. Not sure which style I prefer overall, but each has its pros and cons. Speculation on my part is that TC modified the design due to complaints that folks didn’t like having to go to full cock to install a cap due to lack of room under the hammer. Don’t know, though every so often, someone still complains. About a 175+ year old design.

Three Mile Farm said:

The one I have is bent to the side quite a bit. I don't care for it and just want one more like it came with. If I don't find one I'll bend it back.

Click to expand...

If you have at a minimum a propane torch, a bench mounted vice and basic hand tools it should quite easy to bend it back. The hammer I posted photographs of a few posts back was easy for me to bend, and I am no blacksmith.