FOR SALE Navy Arms 12 gauge sxs

Izzy · Feb 4, 2023

Pietta Navy Arms sxs 12 gauge. Shot four times, cleaned and put in safe. Life happened. Very good shape, all blue and case hardened colors are there. Only issue had a small chip in walnut in front of right lock was repaired years ago. Box that was shipped to me states Magnum but is a standard 12 gauge gauge. $825.00 half of shipping. No PayPal. PM for further information or pictures. Thanks

Sparkitoff · Feb 4, 2023

What vintage is that? Is it a lightweight one?

D. Buck Stopshere · Feb 4, 2023

I think the "Magnum" infers the heavier Pietta shotgun, around 8 lbs. "Magnum", meaning handling heavier field loads, like 1 & 1/2 oz of #4's, and the recoil that goes with them. I had them over the decades. Believe the hammer design indicates the heavier model.

Izzy · Feb 4, 2023

Just weighed it on kitchen scale and it is 6 lbs 14 ounces.

Izzy · Feb 4, 2023

Here is the serial number.

Sparkitoff · Feb 4, 2023

Thanks for the reply! That's very interesting. I have a circa 1970s model that is 5 pounds 12 ounces. I have an 80's 90's and 2000's models and they all weigh 7 pounds 4 ounces. I didnt know there was one that was in-between weight. I'm really looking for another 5 pound something late model. Maybe mine are the same weight because all mine are Pedersoli. Hmmmm......

briarsoul · Feb 5, 2023

Is it choked?

Izzy · Feb 5, 2023

I do not know…..

Izzy · Feb 7, 2023

Thanks for the comment

Izzy · Feb 8, 2023

Maybe my kitchen scale is a little off…..

Sparkitoff · Feb 8, 2023

I'm interested in one of the 5- pound 8 -ounce to 5 -pound 12 -ounce versions. I have one that needs a mate to become a composed pair.

Izzy · Feb 11, 2023

Thanks for the comments.

TransYank · Feb 12, 2023

Hello, I'm interested can you please give me the measurements of the front of the comb and rear (Looks like in pic rear is 2")I have two original English SxS that fit me perfect. I have a CVA that the comb is to high I can't hit a thing with it and it slaps my face..

Ohio Rusty · Feb 12, 2023

Izzy said:
I do not know…..

To check to see if the barrels have any choke, use a dime. If the dime slides into the end of the barrel, there is no choke. If the dime won't go all the way in, then it probably has a modified choke in that barrel.
Ohio Rusty ><>

Izzy · Feb 13, 2023

Thanks for the choke/dime tip. I’ll have to unpack it and try the dime. Currently in shop working on my boat.

TransYank · Feb 13, 2023

Sir could you please check the measurements of the comb height for me when you unpack it. I'm very interested in buying. Thank you.

Izzy · Feb 13, 2023

Here is the measurement at front of comb and rear of stock. Hope this helps.

Izzy · Feb 13, 2023

On first one should have measured at bottom of ram rod not top.

BillRob · Feb 14, 2023

Ohio Rusty said:
To check to see if the barrels have any choke, use a dime. If the dime slides into the end of the barrel, there is no choke. If the dime won't go all the way in, then it probably has a modified choke in that barrel.
Ohio Rusty ><>

My recollection is that a dime won't fit into a full choke shotgun barrel, but it will fit snugly into a modified and somewhat loosely into an improved cylinder. This is not a good test for a jug choked barrel.

Izzy · Feb 14, 2023

Thanks….

If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

FOR SALE Navy Arms 12 gauge sxs

Help Support Muzzleloading Forum:

36 Cl.

Attachments

40 Cal.

36 Cal.

36 Cl.

36 Cl.

Attachments

40 Cal.

32 Cal

36 Cl.

36 Cl.

36 Cl.

40 Cal.

36 Cl.

40 Cal

40 Cal.

36 Cl.

40 Cal

36 Cl.

Attachments

36 Cl.

58 cal.

36 Cl.

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!