• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Need help with a Russ Hamm lock

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 1, 2019
Messages
122
Reaction score
178
Location
Canyon Lake, TX
A few years ago I bought a .45 cal left handed rifle. The lock was made by Russ Hamm, the barrel by G.R. Douglas, and it was built by someone named J.M. Chandler. It quickly became my favorite rifle until I discovered a problem. The hole for the rear screw that secures the lock into the stock was drilled too close to the edge of the plate and the plate itself is not hardened correctly. It wasn't long before the shoulder on the hammer or cock began to peen the edge of the lock plate and it became obvious the screw hole and edge of the plate were going to meet leaving a "U" instead of a "O". So I'm looking for someone who can fix this problem either by adding metal to the edge next to the hole and tempering the plate or, if necessary, making a new plate. Or let me know if you have a better idea. The rifle is a beauty and a tack driver. I want to get it back to shooting.
John
 

Attachments

  • 20190730_130043.jpg
    20190730_130043.jpg
    527.2 KB · Views: 5
  • 20200202_163301.jpg
    20200202_163301.jpg
    963 KB · Views: 0
If you provide clearance for all moving and stationary parts, there will be no peening or wearing away of material.

If something is rubbing on something else file or stone those areas/parts.

To my eye there's plenty of material there.

That lock bolster is only so big. It was either get close to one edge or the other edge.
 
Let me try this again. The inside surface of the hammer has a shoulder that comes to rest on the edge of the lockplate at the end of its travel. This arrests the hammer and prevents strain on the mechanism. In this case the plate is too soft and the screw hole too near the edge.
 

Attachments

  • IMG_20230203_151623047.jpg
    IMG_20230203_151623047.jpg
    1.4 MB · Views: 0
If the screw is in the lock plate it shouldn't deform the hole. From the picture I can't tell if there is a hole behind the hole in the plate
 
Old thread, I know. Did you ever resolve the problem? If the screw is loose when threaded into the bolster, there are several ways to fix it, ranging from shade tree to professional.
 
Back
Top