• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Quality 1/16 drill bits

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 6, 2022
Messages
308
Reaction score
435
Location
USA
I'd imagine this has been asked before but the search function didn't turn up any results. Are there any quality 1/16 drill bits? Just gave up a frustrating day in the shop breaking 5 drill bits trying to drill a barrel tenon for pins. I broke 2 makita bits and 3 cheap bits. Tenon's are mild steel, drilling nice and slow with little pressure. Last bit broke off in the tenon with nothing to grab hold of. Called it quits. Anywhere you can get quality drill bits these days?
 
Are you using a drill press?
Even if he is using a drill press the real question is is he using the stop? Using the stop to keep the feed down to about .005 will keep you from breaking drill bits. Bump the stop, then turn enough to feed .005 then do it again. Drill problems will be reduced 99%.
As I reread you are drilling "nice and slow with little pressure" Not the way to do it. You will be shaking hands with broken drill bits forever that way. USE THE STOP.
 
Last edited:
JHB, checked Little Machine Shop, looks like they only sell sets. Kansas and Poker, will check out those sources, thanks. Bill yes I am using a drill press. And not using Harbor Freight!! 2 Were Makita, the other cheap ones were from Amazon, probably on par with Harbor freight.
 
Makita are likely made in China too. Do check where made before buying. And even the best bits can be broken by poor tecnique just like even the poor quality bits can sometimes get the job done. To maximize your odds in any sort of machining get high quality tools and use them properly.
 
Spyder. Not cheap but you can buy them one at a time from Lowes. USA made - I've never had problems with them. Use a little oil. Good luck!
 

Attachments

  • Spyder bit.jpg
    Spyder bit.jpg
    620.2 KB · Views: 0
You are breaking those small drill bits because you are running them too slow and your feed rate is too fast - period ---:rolleyes:. Cobalt is hard and they can shatter very easily. The HSS bits are better for what you are doing.
 
Back
Top