• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

FOR SALE Folding Peep Sight

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The Spring weather here has been miserable but provided time to catch up. I have one completed sight ready for shipment and two more in process.

Please PM if interested.

1677938459123.jpeg
1677938481263.jpeg
 
This sight is being fabricated on an ongoing basis. All orders have been filled at this time and I have three more sights on the bench. Please advise here if you have any questions, but please PM to place an order rather than add a comment on this post.


This folding tang peep sight should be suitable for use on rifles having a tang length between 2" - 3" . It will not work on long, Hawken type tangs. A long tang version is under development.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.

The base is slotted to allow for differences in tang screw location and is slightly curved so as to lay flat on your curved tang.

Windage is adjustable by turning the pivot screw.

Elevation is adjustable by moving the aperture up or down on the staff.

The aperture disc has been blackened to reduce sun glare. Aperture diameter can be made to your specification.

You should be able to mount the sight using your existing tang screw, however if your trigger plate is threaded 8-32, I find that a flat headed lock bolt works much better. I can provide a polished and browned lock bolt if desired at additional cost. It will be necessary for you to cut it to the proper length.

I have mounted this sight successfully on three different rifle designs as shown in the photo below.



View attachment 131533 View attachment 131534 View attachment 131535

The sight is $75 plus $5 for shipping. Add $3.00 if you want the lock bolt. Payment by money order is preferred but I can take Paypal if absolutely necessary. If it does not work on your rifle just send it back for refund.

Peep sights effectively sharpen the target image at longer ranges. Please advise any questions.
Tom, are you still fabricating or taking orders for these peep sights?
 
Are you still taking orders? I am very interested. Please reply and cost. Thank you
 
I am interested in purchasing one of your sights but I can’t find out how to private message you. Can you give me a hint as to how I should proceed? Thanks
Click on the envelope icon at the upper right corner of your screen and you will be able to start a conversation with him.
 
This folding tang peep sight is being fabricated to order, on an ongoing basis. It is suitable for use on rifles having a three inch tang and can be mounting using the existing tang screw as shown below. It is not suitable for long lollypop or Hawken type tangs due to the height of the staff.

The sight is intended to be used in conjunction with the existing barrel sights. Flipped it up for longer range shots or when more precise sight definition is desired. It is adjustable for elevation by moving the orifice disc and windage is adjusted by turning the pivot screw.

1700776088749.png
1700776129404.png


1700776006248.png
1700775977345.png


The standard aperture diameter is 0.070”. Larger or smaller aperture size is available upon request. Some shooters have wanted a small diameter for target and an additional larger one for hunting. The aperture disc is blackened to reduce glare.

I can supply the sight with a polished and browned 8-32 flat head lock bolt which affords a more rigid mounting and which can be cut to proper length.

Because different rifles have different wrist geometry, the sight base is slotted to provide a greater range of elevation adjustment. While sized for the 8-32 screw the slot can be made to accept a larger screw upon request.

The sight is $80 - Add $3 if the 8-32 lock bolt is desired. Additional aperture discs are $10 each. Fabrication time is usually 2 – 3 days. There is no charge for shipping and if it doesn’t fit your rifle, just send it back for a refund.

Please send a PM for payment information or for answers to any questions.

Member feedback:


https://www.muzzleloadingforum.com/threads/tom-a-hawks-peep-sight-review.164329/

https://www.muzzleloadingforum.com/threads/brass-peep-sights-from-tom-a-hawk-yep-they-work.159378/
https://www.muzzleloadingforum.com/threads/open-iron-sights-or-peep.166563/page-5#post-2390175
1700776424360.png
 

Latest posts

Back
Top