• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Attaching a Trigger Guard

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 11, 2011
Messages
4,364
Reaction score
10,887
Location
Surry County, North Carolina
Putting on the rigger guard is my least favorite thing to do.
I was having an uneasy time getting this German Silver trigger guard to bend nicely to fit the pistol grip and was worried about it breaking. I thought that, instead of tapping it into shape against the pistol stock and risk cracking the wood, I would make a shaping form.
I simply cut two blocks of wood to the inside shape of the pistol handle. Then I clamped the front trigger guard tang tightly between the blocks. Next I also clamped the flat down securely. (I had already gut out an area for where the rear tang would go.) Then I tapped the rear extension of the guard against the wood form and it went nicely into shape. I sometimes using a clamp to draw it in also, and I got it close enough that I could lightly tweak it by hand.
It worked pretty well for me.
Is this process commonly used and I just re-invented the wheel?
 

Attachments

  • tg 1.jpg
    tg 1.jpg
    278 KB · Views: 1
  • tg 2.jpg
    tg 2.jpg
    159.5 KB · Views: 0
  • tg 3.jpg
    tg 3.jpg
    131.3 KB · Views: 0
  • tg 4.jpg
    tg 4.jpg
    275.9 KB · Views: 0
  • tg 5.jpg
    tg 5.jpg
    269.9 KB · Views: 0
Definitely kudos to two builders on this forum. 1st to PathfinderNC for the idea of a trigger guard placement jig. With his description I made up one to help fit a guard on a pistol I am making. I laminated 3 pieces of wood, one which was about 1/8” thick and placed in the middle and gapped such that the tabs on the guard would slide in. That eliminated having to inlet the front tab. Like Pathfinder, the guard was clamped to the gig and pressed against the patterned shape. The location of the two tabs were now marked and these marks will be transferred to the stock.
2nd idea is thanks to Dave_Person. By increasing the length of the front tab, the holding pin will be within the lock mortise and under the side plate.
Great ideas here on this forum.
41C1C30A-5354-43CC-9246-0F7D3CB880DD.jpeg
E618BE0A-3786-458A-8D16-DE6BB52ACE49.jpeg
 
I am ready glad this little trigger guard former was a help to you! Such a simple idea and easy to make and use, but it sure does the trick.
*** One thing to note with I used the jig- mark on the jig exactly where the trigger placement is, so that the bow will be in the proper location when you form it into shape.
 
Last edited:
I'm working on a Flintlock Pistol build now. I found that a deep socket in various sizes can help shape a trigger guard when set in a vise and used as a mandrel to make smooth curved bends. Here is a picture of how it worked for me. The guard was not bent at all at the rear when I received it.
 

Attachments

  • IMG_2635.JPG
    IMG_2635.JPG
    184.6 KB · Views: 0
  • IMG_E2637.JPG
    IMG_E2637.JPG
    348.5 KB · Views: 0
Back
Top