Oil finish on a stock.....

Phil Coffins · Jan 24, 2023

Russ T Frizzen said:
The finish is over aqua fortis, right?

The stain is walnut husk in water to raise the grain which doesn’t have much color but has tannins. Then aqua fortis with the standard blush. The resulting color has nice depth and sort of enhances the refraction of the curl that I don’t get with dyes.

deertraks · Jan 24, 2023

I know this will raise some eyebrows. Have you ever heard of Tru-oil/amour-all finish?

SwanShot · Jan 25, 2023

Dale Allen Raby said:
Boiled Linseed Oil. The old rule says to rub it in once an hour for a day, once a day for a week, once a week for a month, once a month for a year and once a year for the rest of your life. It think that's a pretty good procedure, but after a year or two, I apply Johnson's Paste Wax over the top and reapply it after each time I clean the gun.

This is the way I was taught by a gunsmith when I was doing stocks for those other things.
But--- the difference was to work the previous layer up with thousand girt paper dipped in the oil until it blends. Them wipe it off. Do not polish, just wipe. Wait till it's hardened then do it again, and again, and again. Once a day, if it has hardened, for a week. Once a week for a month. Once a year forever. If it is done right then you will get that "looking though a layer of slightly misty glass" look.

Kentuckyjed · Jan 25, 2023

I have had really good luck with the Tried and True Oil Varnish mixed 1/2 with turpentine and rubbed in with a scotchbrite pad, wiped down with a rag. You can also use the fine steel wool after the wipe and apply as many coats as you want, rub and repeat.

Patched · Jan 25, 2023

My first 2coats are a thinned tung oil, trying to get the finish in the wood fibers as opposed to on the wood. Followed by 3-5 coats of unthinned oil 48 hrs between coats…Minwax finishing wax twice on top of that.

painter · Jan 25, 2023

deertraks said:
I know this will raise some eyebrows. Have you ever heard of Tru-oil/amour-all finish?

I have. A buddy used that recipe to refinish an unmentionable. Looked OK, but no idea how it's aged, or held up to any weather.

As a painter, it makes no sense to me to intentionally mix silicone into a finish.

ETipp · Jan 25, 2023

Patched said:
My first 2coats are a thinned tung oil, trying to get the finish in the wood fibers as opposed to on the wood. Followed by 3-5 coats of unthinned oil 48 hrs between coats…Minwax finishing wax twice on top of that.View attachment 192906

That's very nice!

LIVINtheLIFE · Jan 25, 2023

I’ve used BLO on many wood handled tools and axe handles with great results. Tung oil will get similar results but does tend to not get “sticky” per se but definitely “grippy”. It will pickup grime off dirty hands and stuff and kinda hold on if that makes any sense. It’s good for axes if you don’t mind that look for anti-slip, but a gun finish I’m not too sure that’s subjective. I just picked up a bottle of BirchWood Casey Genuine Oil that I want to try, it’s supposedly the natural satin substitute finish to their Tru-oil, could be up your alley. I’d also check out the Walrus Oil line, it’s become my go to for natural finishes on just about everything. Their Knife&Axe oil/wax or Butcher Block oil/wax is food grade safe as well.

ETipp · Jan 25, 2023

LIVINtheLIFE said:
I’ve used BLO on many wood handled tools and axe handles with great results. Tung oil will get similar results but does tend to not get “sticky” per se but definitely “grippy”. It will pickup grime off dirty hands and stuff and kinda hold on if that makes any sense. It’s good for axes if you don’t mind that look for anti-slip, but a gun finish I’m not too sure that’s subjective. I just picked up a bottle of BirchWood Casey Genuine Oil that I want to try, it’s supposedly the natural satin substitute finish to their Tru-oil, could be up your alley. I’d also check out the Walrus Oil line, it’s become my go to for natural finishes on just about everything. Their Knife&Axe oil/wax or Butcher Block oil/wax is food grade safe as well.

When you listed BC genuine oil, are you referring to BC Tru-oil gun stock finish?

I have used many bottles of BC Tru-Oil on stocks since the early 80's. I have no complaints on it whatsoever. It can be used in different capacities and in conjunction with wood grain filler or stain. I have found BC to be fairly durable as well. One great thing about it is, you can put whatever type top finish you want. From no sheen, to satin finish, gloss to high gloss.

This time around I was really looking into an oil finish but after reading all the replies in this thread, I may just go back with BC. But we shall see I reckon.

Old-Duckman · Jan 25, 2023

deertraks said:
I know this will raise some eyebrows. Have you ever heard of Tru-oil/amour-all finish?

I actually have heard of this. For some reason it causes the Tru-oil to cure very quickly. If I recall, you can get 4 or 5 coats on in a day. I have never tried it but did come across it on the Net. Looked it up, Here is a link

https://www.rimfirecentral.com/threads/woodstocks-amazin-stock-finish-photos.331108/

the article says that he can put 24 to 36 coats on a day!

LIVINtheLIFE · Jan 25, 2023

ETipp said:
When you listed BC genuine oil, are you referring to BC Tru-oil gun stock finish?

I have used many bottles of BC Tru-Oil on stocks since the early 80's. I have no complaints on it whatsoever. It can be used in different capacities and in conjunction with wood grain filler or stain. I have found BC to be fairly durable as well. One great thing about it is, you can put whatever type top finish you want. From no sheen, to satin finish, gloss to high gloss.

This time around I was really looking into an oil finish but after reading all the replies in this thread, I may just go back with BC. But we shall see I reckon.

Nope I am referring to BC Genuine Oil. It’s not nearly as common, I picked mine up at the local hunting store one day to try. I find Tru-oil to be a little too glossy.

user 55620 · Jan 25, 2023

I always use boiled linseed oil applied by hand and fingers. Apply a lot. Leave for an hour or so then wipe off the excess. I also massage the wet stock with 0000 steel wool.

LSB · Jan 25, 2023

I like Tung Oil-several hand rubbed coats.

frankie · Jan 25, 2023

LSB said:
I like Tung Oil-several hand rubbed coats.View attachment 192986

LSB That is nice

SPQR70AD · Jan 25, 2023

Dale Allen Raby said:
Boiled Linseed Oil. The old rule says to rub it in once an hour for a day, once a day for a week, once a week for a month, once a month for a year and once a year for the rest of your life. It think that's a pretty good procedure, but after a year or two, I apply Johnson's Paste Wax over the top and reapply it after each time I clean the gun.

did Torquemada make that rule?

ETipp · Jan 25, 2023

LIVINtheLIFE said:
Nope I am referring to BC Genuine Oil. It’s not nearly as common, I picked mine up at the local hunting store one day to try. I find Tru-oil to be a little too glossy.

Thanks. You can always tone down the sheen on the regular Tru oil with 00 or 000 steel wool. But I will look into some of the genuine oil.

SPQR70AD · Jan 25, 2023

I have had great results with Oil of Olay

Dale Allen Raby · Jan 25, 2023

SPQR70AD said:
did Torquemada make that rule?

Yes. I believe it was the 11th commandment: "Thou shalt use boiled linseed oil on all traditional gun stocks. Thou shalt violate this commandment only if thou wisheth to be inquisitioned." The name rang a bell, but I ended up having to Google.

frankie · Jan 25, 2023

Patched said:
My first 2coats are a thinned tung oil, trying to get the finish in the wood fibers as opposed to on the wood. Followed by 3-5 coats of unthinned oil 48 hrs between coats…Minwax finishing wax twice on top of that.View attachment 192906

Really nice Patch

centershot · Jan 25, 2023

Old-Duckman said:
I actually have heard of this. For some reason it causes the Tru-oil to cure very quickly. If I recall, you can get 4 or 5 coats on in a day. I have never tried it but did come across it on the Net. Looked it up, Here is a link

https://www.rimfirecentral.com/threads/woodstocks-amazin-stock-finish-photos.331108/

the article says that he can put 24 to 36 coats on a day!

Yes, I've used that method on a new walnut stock. The Armor-All catalyzes the Tru-Oil, allowing it to dry in minutes. I rubbed in 14 coats in one day and let it hang overnight. The next day the finish was hard, I drilled for the buttplate and trigger guard screws and assembled the rifle. By 2 PM I was on the range shooting it. I can't speak to how weatherproof it is, it never goes out in the weather. It's a rimfire single-shot plinker that I play with now and again, but it's a nice looking finish!

Oil finish on a stock.....

Help Support Muzzleloading Forum:

69 Cal.

40 Cal

36 Cal.

.45, .50, .62 cal.

40 Cal

50 Cal.

69 Cal.

32 Cal

69 Cal.

45 Cal.

32 Cal

Attachments

OSF

40 Cal

54 Cal.

45 Cal.

69 Cal.

45 Cal.

54 Cal.

54 Cal.

40 Cal

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!