True, but I doubt their attire shinned in the sunlight.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Llyman great plains rifle
- Thread starter Crow#21957
- Start date
Help Support Muzzleloading Forum:
but I always saw indians signaling each other with shiny rifles reflecting the sun lol. so I guess back to the tried and true smoke signals
I think the Mississippi rifle is one of the best looking ML a well built military rifle unlike the delicate Kentucky and pennsylvania rifles
Indeed. As I have said, some ML look really nice sporting brass. But for this ole boy and his big game ML hunting rifles......that dog don't hunt.
Last edited:
Geez y'all quit watching old TV & movies.Steel was scarce but iron was avaialble to blacksmiths n gun builders. Brass was easier to work with n cheaper to make. They did not buff it up to shine unless paid to. Brass is lighter than iron n as stated doesn't rust but will corrode
I have a Lyman Great Plains barrel that was 45 cal. And was bored out to 20 ga. Don’t have a gun to change this barrel to. Don’t know anything about how it was done and don’t have any use for it. Anyone have any suggestions for it let me know.
Yup, send the rifle to me. I'll figure out something.
Did a little research on this and here is what one fella seems to think.
https://ehcnc.org/decorative-arts/historic-trades/the-kentucky-rifle/
redbeard381
32 Cal
I always heard brass was significantly cheaper than iron or steel -especially during certain times in the flintlock era. High end guns out of England for example were iron mounted. Brass can be sand cast at high volume in a European (and later, American) foundry and shipped unfinished in crates to gun makers, or stores. Iron and steel had to be hand forged, production forged, or cast. As far as I gather, It's the same reason we use brass for certain things today like cheap lamp posts etc.
- Joined
- Aug 16, 2021
- Messages
- 257
- Reaction score
- 297
At least a few Hawken rifles did have brass buttplates and trigger guards. They made them for local customers that didn’t need the heavier, sturdier Hawken that we associate with westward expansion. I believe they were around .48 caliber. I have a video of one that I took at the Hawken Classic but the file is too large to post here.
Last edited:
And there you have it. Also why military rifles had brass. It does not require the same level of care as iron does.
longcruise
70 Cal.
Once I quit polishing the brass I began to see Bigfoot regularly.
ahahha LOL
Jedidiah
Old, Grumpy & still kickin !
I just had a GPR barrel bored smooth to .58 by Bobby Hoyt. He told me that there was not enough barrel in a 15/16 GPR to go .60??? I would check that one very carefully before i used it!
Excellent job of staining & finnish, has look of a quality vintage built rifle !The Lyman GPR is my top choice for affordable muzzle loading rifles. The styling, and over all quality is hard to beat. Of the ones I have built from kits and a couple of factory guns that have been in my shop there are three things I generally do to make them a bit better. The wood can be reshaped a bit and stained to look more like American walnut. The set triggers get some light stone ing to sharpen the edges and the adjusting screw replaced with a longer one. Of coarse a fellow can do nothing to them and be happy but I like to tinker.
IMG_1292 by Oliver Sudden, on Flickr
relic shooter
morehops52
45 Cal.
When at the range I use a slip on recoil pad or my lead sled. I am not fond of the pain a big bore (45+) with a metal butt plate can deliver. That pain can last for days. I never feel it though when i pull the trigger on a white tail and being as it's only one shot, no pain tomorrow.
My 54 New Englander has a flat steel but plate ,doesn't bother me at all with heavy loads. On the other hand, my 54 cal Dixie Hawken with it's curved brass butt plate leaves my shoulder purple and sore!
Indeed. I too, have a New Englander that I shoot only conical out of. Never had a problem with recoil. Guess I'll be finding out with my Lyman GPR soon as I am able to get to the range. Between a really bad knee issue and the crappy weather, its about killing me not to have been able to shoot that ML.My 54 New Englander has a flat steel but plate ,doesn't bother me at all with heavy loads. On the other hand, my 54 cal Dixie Hawken with it's curved brass butt plate leaves my shoulder purple and sore!
I'm not recoil sensitive in the least but I can do without for sure. Hoping 90 grains of 2F with the .535 RB will be fairly comfortable. That appears to be the load many choose out of their GPR.
Similar threads
- Locked
