-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Oil finish on a stock.....
- Thread starter ETipp
- Start date
Help Support Muzzleloading Forum:
- Joined
- Aug 27, 2004
- Messages
- 2,985
- Reaction score
- 6,370
Best finish I have ever used: Sutherland Wells Ltd, polymerized tung oil finish. It is also one of the easiest for me.
Larry
Nice! Tru oil is also a polymerizing tung oil finish. Lots of people finish guitars with it to keep that natural wood look. They all say to thin it out and put it on extremely thin in many layers. If you don't seal the wood first, you will have open grain with tru oil. If you want a smooth finish, use a wood sealer. Sand the sealer down. Seal it again, sand it down. Then apply many thin layer of water oil finish you like.
A lot of the final appearance is not so much due to the brand of finish but to how it's applied. I'm lucky enough to have a copy of Alvin Linden's book "Stockmaking". He was one of the premier gun stockers of the '30's '40's. (It's for sale by the way). One of his methods was to give the stock a liberal dose of linseed oil and let it set up for quite awhile and then follow it up with top coats of varnish. He claimed it looked just like the famed "London Oil Finish". It's generally the method I use. Ask 10 folks what is the best finish and you'll get 10 different answers. What is usually agreed on though is that linseed oil is not waterproof no matter how old it is.
Not just BLO rags but rags used to apply any type of finish, be they oils or varnishes.
satwel
40 Cal.
Over the years I've tried them all. Now I use only Jim Chambers oil. It's the easiest to apply, dries fairly quickly, and gives a durable, authentic finish.
Bobby MacAlphin
36 Cl.
- Joined
- Dec 11, 2021
- Messages
- 64
- Reaction score
- 169
Nice!
Tru Oil from Birchwood Casey. Easy, durable, can be left gloss or taken down to the sheen you want - just let it cure a few days before taking it down with OOOO steel wool. Also a good idea to wait 24 hrs between applications (small drip, spread with a finger).
Siringo
32 Cal.
- Joined
- Nov 25, 2014
- Messages
- 288
- Reaction score
- 219
What I like about Permalyn on a hunting rifle is that it is tough as nails. Oil finishes are not. I hunt in a very brushy area and have experienced the differences. Especially in inclement weather Permalyn is better than oil.
I have used all of the above and all are good, BC-tru oil is easy. I take a thin cotton patch and wipe very thin coats until each coat looks finished, wait several hours and rub another thin coat until that coat already looks finished. About 4 or 5 trips and the finish is hard to beat. Each coat must treated like you are trying to remove the finish.
JBird
36 Cal.
- Joined
- Mar 16, 2011
- Messages
- 141
- Reaction score
- 296
Not all tung oils and linseed oils are created equal. I've used formbys tung oil twice now (read about it on ALR) with great results, one is curing as we speak, I was never happy with the permalyn so I stripped it off an older gun.
Ive been stock making stocks since 1994. From my experience any oil is great as long as it is tung oil. I add a little urethane to make it harder, (NOT polyurethane). Linseed oil is not that great on being waterproof. I know most of my fellow guild members use tung oil and stay away from tru-oil and especially linseed or linspeed oil. David W is so right on (be careful of the rags you use on applying it). After I use them for applying finish, I discard them in a can outside because they may spontaneously combust at least while they are still wet. After they dry there is less chance. I would post pictures of some of the stocks I have refinished but the stocks I do, the pictures cant be posted on this sight. They are not muzzleloaders. I really hope this helps.
Artists Grade Refined Linsead. Non sticky, Almost clear, Penetrates Well and drys well. One coat a day untill it won't take any more. Put it away to dry then re-coat with 70% oil + 30% Terabine.(Drying agent) to build a finish.As used by B'ham & London Stockers. All it then needs is ELBOW GREASE,Blood,Sweat & Tears..This is of course After all the wood finishing and grain filling before you think of the oil stuff. O.D.
Attachments
Last edited:
On my curly maple stock, Iron nitrate with Tried and True Varnish oil. I finished my Kibler SMR in it. Thinned with turpentine and hand rubbed 4 coats. Works great. In the past on walnut, I used Tru Oil with good results but it stayed sticky for a while.
It is what you are comfortable with and the finish you are after.
It is what you are comfortable with and the finish you are after.
That's what gets me. Do a search for tung oil and you get page after page of different brands. And they all seem to say 100% Pure. And some of the prices.......more than I paid for the stock.
Ah! Which to Choose? Which to Choose?
user 43911
45 Cal.
- Joined
- Mar 6, 2020
- Messages
- 556
- Reaction score
- 378
The only problem with Watco Danish oil is it's for INDOOR use only, if gun gets in the weather it's not good.
