• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

First flintlock deer

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This was just lightly lubed, with a lubed felt wad below it. The bullet came out of the mold at .403, and I sized it down to .401, which made it load with just enough resistance I could start it with very firm thumb pressure.
Congrats on your trophy size big doe there! I also like your load and bullet. Is it in a plastic sabot, a fabric patch, or paper patch?
 
No leading problems?
No none so far, it's a tight fitting felt wad, and I'm sure that is sealing the bore pretty good. The recovered bullet had obviously slugged up and filled the grooves. Same as with conventional cast bullets, if you seal the bore it eliminates gas cutting.
 
Really surpised me as well. I just didn't feel comfortable shooting a deer with that little roundball, so started testing different bullets. It's a 1-48 deep groove green mountain barrel that's super accurate with roundball, but after trying several bullets over the summer, this one proved to be plenty accurate. I assume the powder charge is high enough that it's stabilizing the bullet, as I had little accuracy until I got above 50gr. During testing.
I'm quite surprised that you found a bullet for your .40 that didn't tumble ass over e!bow right after leaving the barrel! More often you need shallow rifling and a slight!y faster twist rate but I agree with your decision to up the powder charge substantially, it seems to have worked and you got near perfect terminal performance too. I always got better accuracy with any conical by adding a lubed fiber wad in between the powder and bullet.

lL



n
 
No none so far, it's a tight fitting felt wad, and I'm sure that is sealing the bore pretty good. The recovered bullet had obviously slugged up and filled the grooves. Same as with conventional cast bullets, if you seal the bore it eliminates gas cutting.
Now that is a nice rifle n sure fine tick toter you let the air out of, congrats
 
I finally connected on a nice fat doe with my .40 cal flintlock. I developed a load using 70gr 3f black powder, a durofelt wad lubed with deer tallow/ beeswax/ olive oil, and a 175gr .401 bullet from an Accurate mold. I was able to get 1.5" groups at 50yd, and 3" at 100yd with this combo. Pictured below is the bullet, along with the recovered bullet.View attachment 188839
I had one doe tag left in my county as Ohio's muzzleloader season opened on Saturday. I elected to hunt from an elevated blind overlooking a small foodplot with 60yd max shot distance.View attachment 188840 I got all situated about 40 minutes before legal time, and discovered a 4ft long rifle doesn't fit well in a 5ft box blind. About 20 min later I watched a very nice buck walk out in the moonlight, mill around, and leave after about 10 minutes. Next was a small buck about 8 am. He walked past at 50yd and headed off to bed. Both were safe as I needed a doe.
I had my wife hunt that evening, as she still had a buck tag, thinking that nice buck I saw might show up during legal time for her. Her evening ended with 5 big does at 25-50 yd. Feeding in the foodplot, she let them go, waiting on her buck.
Sunday morning I skipped church and hunted again, catching a glimpse of 2 does in heavy brush, but no chance for a shot.
That evening found me sitting in the blind again overlooking the plot. I got in at 3pm, and was enjoying the crisp weather, when the neighbors comenced to firing about 500rd of .556 and pistol rounds in their woods 200yd away. I just drank my coffee, and hoped they would hang it up soon.
The shooting stopped at about 4:30, and at 4:45 I heard a stick pop to my right the old apple orchard. I caught sight of a doe picking through the brush heading for a lane I had trimmed. I slowly got to my knees in the blind, manuvered the rifle out the window and waited. After a few minutes she entered the opening, I stopped her with a grunt and focused on the sights, placing them right behind her shoulder. The flash and recoil seemed instantanious, and she spun around running the path she came from for 10yd, then turned hard to the right away from me and ran straight up a steep hill 30yd before I heard her crash.
After recovering her, I found the bullet hit a bit forward and had passed through both shoulders,lungs, and was caught in the offside hide. She had her right leg back, and left stretched forward at the shot, otherwise I would have gotten a passthrough. That bullet did it's job, and I was more excited about this doe than the last few bucks I killed. I'm most definantly hooked.View attachment 188841
Nice story, congratulations on your success!
 
Back
Top