Onojutta
45 Cal.
Is it more appropriate to darken engraved brass on an early style longrifle, or leave it to patina naturally?
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Darken engraved brass?
- Thread starter Onojutta
- Start date
Help Support Muzzleloading Forum:
Onojutta
45 Cal.
bump
ronaldrothb49
45 Cal.
- Joined
- Oct 31, 2021
- Messages
- 678
- Reaction score
- 1,145
Real brass will tarnish rapidly so really don't need to do anything to it. If you want the engraving to stand out you can go over it with a wash of black paint and then sand the paint off the surface leaving it in the engraving.
- Joined
- Aug 25, 2003
- Messages
- 6,386
- Reaction score
- 1,251
No need to sand. Wipe off the surface before it dries. Many engravers use Rustoleum flat black, or similar paint.
Onojutta
45 Cal.
rich pierce
70 Cal.
Cold blue works too.
- Joined
- Jan 9, 2008
- Messages
- 1,893
- Reaction score
- 2,092
Let the brass age on its own. Natural patina looks better.
Boil and egg. Peel it and rub the brass with the cooked yolk. It'll tarnish right before your eyes.
Col. Batguano
75 Cal.
- Joined
- Feb 10, 2011
- Messages
- 5,034
- Reaction score
- 1,407
I use a Birchwood Casey product called "Brass Black" It helps me see if my engraving is too shallow so I can deepen it. I probably wind up doing that 5-6 times on every part I engrave. As Rich said, Oxford Cold Blue works just as well.
Put it on the area and darken the whole thing. It'll be dry in just a few minutes. Then take fine sandpaper (600 grit is fine, but remember to use a backer or else it will dig in to your sharp edges) and remove it from the high parts you want shinier. You need to sand the area anyway to get rid of the burrs your gravers made. Repeat until satisfied. Final polish may be with finer sandpaper, depending on how shiny you want it, but I generally don't go finer than about 1000 grit. The finer the grit, the longer it will take to age and get that "yellow mustard" look to it.
Put it on the area and darken the whole thing. It'll be dry in just a few minutes. Then take fine sandpaper (600 grit is fine, but remember to use a backer or else it will dig in to your sharp edges) and remove it from the high parts you want shinier. You need to sand the area anyway to get rid of the burrs your gravers made. Repeat until satisfied. Final polish may be with finer sandpaper, depending on how shiny you want it, but I generally don't go finer than about 1000 grit. The finer the grit, the longer it will take to age and get that "yellow mustard" look to it.
- Joined
- Aug 25, 2003
- Messages
- 6,386
- Reaction score
- 1,251
The objective is to make the engraving more visible even if the ambient lighting is poor or at a poor angle.
IMO, the easiest, and fastest way to darken brass is to rub your wet(black powder residue soaked) cleaning patches on the brass part. Blend the finish with very fine(4/0) steel wool/ScotchBrite. Make sure your brass is bare…. isn’t coated with varnish/stock finish. I think letting the brass age naturally can take quite a long time. Artificially done well, it can accentuate nice engraving, give a naturally aged appearance, and(most important to me), reduce glare when hunting.
