Uncle Miltie
50 Cal.
I collect original bags horns and rifles, and have found octagonal patches in a few of them. When you really want to be cool though you will run a thread through the patches, keep them on a string and pull them off as needed.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Square patches
- Thread starter T Gregory
- Start date
Help Support Muzzleloading Forum:
Maybe that's my problem, I've been using right handed patches
Quicksilver
-Gone Exploring-
I leave it up to my patch knife. Not sure there is a name of the shape of some of those patches..
- Joined
- Aug 11, 2005
- Messages
- 163
- Reaction score
- 106
This gave me an idea, so that may be dangerous. The patch is only to act as a gasket to prevent the hot gas from passing the projectile and not interfere with its flight.
Have any of you tried shooting with the open end of the patch facing the powder charge? It should still prevent gas from bypassing the projectile, possibly even better since the extra material at the border of patch may seal better between the barrel and projectile, but it could deviate the bullet's flight if it didn't release from it or didn't release evenly.
Inquiring minds probably don't want to know.
Have any of you tried shooting with the open end of the patch facing the powder charge? It should still prevent gas from bypassing the projectile, possibly even better since the extra material at the border of patch may seal better between the barrel and projectile, but it could deviate the bullet's flight if it didn't release from it or didn't release evenly.
Inquiring minds probably don't want to know.
Try tuning your patches upside down
Thanks.........I needed some laughs.....don't quit now.
new2bp
40 Cal
- Joined
- Aug 18, 2021
- Messages
- 322
- Reaction score
- 483
Patch also grabs the rifling (if you have any) and helps impart that spin to the ball.
Personally... what shape would be needed to totally wrap the ball "seamless" ? No creases, folds, gaps, etc. Mebbe I need to tear apart a tennis ball or something.... but I'd think The Ultimate would be patched and lubed (sticky lube on inside) with patch wrapped so it would be seamless.
The only time a patch may have creases or folds is if you have really small balls.
- Joined
- Jan 15, 2009
- Messages
- 2,681
- Reaction score
- 2,729
I thought that only worked in the southern hemisphere.
I use square (more or less) patches all the time. I recycle pillow cases and old clothing and it is too much trouble to cut them round.
What is even more important, is to always use striped pillow ticking. That way, if the gun is shooting to the left or right, simply turn the patch so the stripes point towards the direction you need the ball to hit. You can fine tune a load doing this, once you establish what angle the stripes need to be. Serious shooters will use a cold chisel to make a distinct groove on the muzzle so they can easily align the patch for best accuracy.
Does it work with red and blue striped ticking?
sportster73hp
45 Cal.
- Joined
- Jan 16, 2020
- Messages
- 857
- Reaction score
- 636
Trying to be funny.
Yes Mark watched the video. I use scissors to cut square cleaning patches unless i just buy the round ones.
Actually ther is a name for those patches. PERFECT!
Paul Nelson
Live Free or Die .54 cal
- Joined
- Mar 3, 2021
- Messages
- 85
- Reaction score
- 132
I’ve used this, they work great!
My Lyman 54, doesn’t care either round or square, we still compete and do well with square patches… in my experience, it doesn’t matter. IMHO, it’s hip to be square… ( Huey Lewis and the News) … 
Quicksilver
-Gone Exploring-
The surface area of the patch that is touching the ball and the barrel is only a ring. As long as the patch is thick enough to seal the gas and not slip I would think it would work accurately no matter the shape.
