• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Thompson Center hawken fine rust removal

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 31, 2022
Messages
81
Reaction score
236
Location
Dallas
I picked up a Thompson Center 50 cal. for $225. The reason, it had a very good feel to me at the shoulder and a good bore.
But it had some issues I want to ask about. Very fine specks of rust starting on the barrel. The gun soft case it came with was too small and may have water stain on the front. Some brain surgeon tried to adjust the front dovetail.
I see gunsmiths use carding wheels to work out specks of fine rust and not do much to the finish. Is there a simple way to get the rust under control?
Thanks OP
 

Attachments

  • TC 1.jpg
    TC 1.jpg
    1.2 MB · Views: 1
  • TC 2.jpg
    TC 2.jpg
    1.1 MB · Views: 0
  • TC 3.jpg
    TC 3.jpg
    726.5 KB · Views: 0
  • TC 4.jpg
    TC 4.jpg
    949.7 KB · Views: 0
I bought some synthetic steel wool recently and like it. It’s a fine Scotchbrite equivalent of 0000. That and an oil of your choice will remove the specks. Good old 0000 steel wool will work too, but I tend to press too hard and mar the blueing. The synthetic is more forgiving.
Which color of ScotchBrite is equivalent to 0000 steel wool?
 
I tried out synthetic steel wool 0000. It will not hurt the blueing but it did not remove hardly anything in way of the rust.
I may need to just try harder. But the old school 0000 steel wool did work better, at lest for me.
 

Attachments

  • 0000.jpg
    0000.jpg
    762.8 KB · Views: 0
  • 0000 2.jpg
    0000 2.jpg
    749.1 KB · Views: 0
I tried out synthetic steel wool 0000. It will not hurt the blueing but it did not remove hardly anything in way of the rust.
I may need to just try harder. But the old school 0000 steel wool did work better, at lest for me.
Not too surprised to hear that. I've used mine for blending, which works well. Never tried it on surface rust.
 
I bought some synthetic steel wool recently and like it. It’s a fine Scotchbrite equivalent of 0000. That and an oil of your choice will remove the specks. Good old 0000 steel wool will work too, but I tend to press too hard and mar the blueing. The synthetic is more forgiving.
The scotchbrite I buy has abrasives in the fiber. BE very careful. Normal steel wool and oil with do the trick.
 
I bought some synthetic steel wool recently and like it. It’s a fine Scotchbrite equivalent of 0000. That and an oil of your choice will remove the specks. Good old 0000 steel wool will work too, but I tend to press too hard and mar the blueing. The synthetic is more forgiving.
Hi TDM! Do you mind sharing the brand name and a source for that “synthetic steel wool” you used for rust removal?
Thank you in advance!
JayhawkDan
 
Hi TDM! Do you mind sharing the brand name and a source for that “synthetic steel wool” you used for rust removal?
Thank you in advance!
JayhawkDan
Sure thing.

3M Synthetic Steel Wool Pads, Extra Fine, 6-Pads​

Guess the link didn't copy, buts it's from Amazon. Kibler' has a direct link to it in their tools section.
 
Gun works Muzzleloading Emporium Springfield Oregon. Ordered stainless steel sponge #0009. Took any and all rust off without damage to finish. Used gun oil as cutting agent.
 
I've been following Mark Novac's YouTube channel regarding firearm conservation. He is a firm believer in boiling firearms to clean goo and to convert rust on metal. I also have experience rust bluing unmentionable rifles and shotguns. I'm a believer. It may seem like a PIA but it is easy to either make a steam tube or a boiling tank out of rain gutter. Once the rust is converted, it's easy to lightly polish it off without damage to the remaining bluing.
 
Back
Top