• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

T/C Hawken Half Cock Position?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 26, 2022
Messages
554
Reaction score
712
Location
Texas
So I was looking at a T/C Hawken at a pawn shop yesterday. I don't own a BP rifle but I'm kinda looking.
My question is: where, along the hammer travel from fully down to fully cocked, should the half cock position be? This one had one stop about 3/16" up from the nipple. Then there was the clicking noise and ratchety spot at where I thought half cock should be, but it didn't hold there. Then it held firm at full cock.
Does that sound correct?
By the way, the triggers worked great. Thanks in advance... I love it here!
 
It is probably fine; the noise you are hearing is perhaps a part called the fly which is designed to drop/pivot down to block the half cock notch on rifles with set trigger systems; its there to prevent the sear from catching the half cock when the rifle is fired with the set trigger.
It's not uncommon to have issues with this part in locks that are not kept fairly clean.
 
Sounds like it was probably fine then. It is a .50 cal and even had caps and patches in the patchbox. Ramrod end was falling off, and other end had whatever was on it (jag?) missing. Bore was dark and they had no bore light, so not sure about that.
Thanks for the info!
 
Just one of many little quirks with TC sidelocks. Sometimes you can barely see any space at all 'tween the hammer nose & the nipple at half-cock.
 
Sounds like it was probably fine then. It is a .50 cal and even had caps and patches in the patchbox. Ramrod end was falling off, and other end had whatever was on it (jag?) missing. Bore was dark and they had no bore light, so not sure about that.
Thanks for the info!
With a small narrow beam flashlite you can get somewhat of an idea of bore condition.
 
Back
Top