• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Has anyone rebuilt a muzzle loading gun that has been through a fire?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Heelerau

45 Cal.
Joined
Apr 26, 2013
Messages
896
Reaction score
275
I have an early percussion English sporting rifle that went through a bad fire, the stock was gone, ash. The barrel is not warped, and does not seem to have burnt I have another gun the barrel is both warped and burnt, aka like if you get horseshoes too hot in a forge they scale and burn. My rifle barrel is just a blue colour now and not at all scaled. The lock will need repairing, springs reset, hardened and tempered, the tumbler and scear will need re hardening. cheers and thanks. I have a custom stock maker that will restock the old girl for me.
MY FBG.jpg
 
Dropped the parts off to the stock maker, he has a nice piece of English walnut, reckons he generally get 3 or 4 muzzle loaders a year. Seems to think like me, ( does a bit of gunsmithing) that the wrought iron barrel will likely be ok, but will still proof it before I shoulder it !
 
Is the lock likely to be similar enough to any modern things that you can buy parts and just put it together? I'm thinking springs and sear.

Once the lock and trigger are ready, you just need a lead sled, some bungie cords, and some string for the trigger.
 
The springs can be softened reshaped, hardened and tempered, the sear, tumbler and lock plate can be re case hardened. I will take the barrel off the rifle, and remove the cone, strap it to a heavy timber and let it off, that way I can make up a new barrel if the old one fails. The rifle is worth nothing now as a collectors piece, but is hopefully still a shooter.
 
The chances of an ordinary house fire permanently ruining a forged Iron barrel are very small, because the fire usually doesn't come close to reaching welding heat unless you store guns in the attic where the highest house fire temperatures are recorded. Yes it might scale up the bore some, but that is the same thing (and usually much less) that happens when barrels are initially welded. The bore may have to be reamed smooth and rifled again in a worst case scenario, but that is different than permanently ruining the barrel.

Gus
 
Gus that is what I am hoping will be the case.
Sounds like you have a good plan to proof it once again.

I want to make an important distinction on barrels going through a regular house fire, due to what the barrels are made from and of course what ammo is used afterward.

Many folks don't realize that Barrels are not "hard," because if they were, they would shatter in use. Instead they are made of "tough" materials that withstand the pressures of the ammo used in them.

Steel barrels withstand the pressures of either BP or modern cartridges by what types of Alloy they are made from. Some barrel steels are fine for the lower pressures of black powder, but are not of the correct alloy to withstand modern ammo. Fire heated STEEL barrels CAN become a danger to shoot after a house fire with modern ammo depending on how the heat affected the steel. Also, the thinner the steel barrel, the more likely it can be dangerously affected by a house fire. Personally and as a general rule, I would never again trust a modern steel shotgun barrel after it went through a house fire.

Forged Iron barrels have little or no carbon or other alloys in them. Thus the basic metallurgy of the metal doesn't change when the metal is heated and cools. This is why comparatively thick walled Iron Rifle barrels won't normally be harmed in a fire other than perhaps some scale formed in the bore.

Gus
 
Gus this is pretty much my reasoning to give this rifle a go. I will only proof it with he charge I would normally use. cheers Gordon
 
I once had a prominant M/L builder in our area tell Me in front of a room full of customers that Kit guns were JUNK. Of course his were Golden. He said to prove his point I was to triple charge and triple ball the rifle then fire it. the result was to be a biown barrel. his would be fine,though he would not demonstrate the the process on his rifle first.I told him he was an idiot and anyone following his advice would be an IDIOT too. WE have newbies listening to our advice everyday. Our info should be correct and safe.Most of the showroom crowd left when I did. I understand he was in the business to sell his guns : BUT at what cost. .........Be Safe >>>>>>>>>Wally
 
I'm following your thread. I'm keeping my fingers crossed for you that she will still group well. That rifle has a great story now. Very figuratively speaking you have brought it back from the dead. A Phoenix if you will. That could make a good patchbox engraving to accompany that story. 😉
 
How much would something like this cost? I have one or two old guns that are in great shape except the wood has mold or is severely damaged
 
My bloke, including supplying the English Walnut charged me $1500 AU for the job.
 
I picked her up last week, just getting ready to bring her back on the plane to SA, next trip back. Will sort out the lock next. I have to get a replacement ball mould, .71 and they seem to be hard to get at the moment, last one I bought from Track of the Wolf, just a bag mould, but fine for this rifle. Will also have to re proof the barrel, but won't do than till I am able to cast ball for her
IMG_0923.jpg
 
That is the plan, just the way things worked out, will proof the barrel out of the stock, I am 95% sure it will be ok. She hold well again, there is still some tension in the springs, but not enough.
 
Lock is now refurbished, the springs a lovely fire blue, all parts including lock plate case hardened, fitted back in the rifle, lock works as well as it did before the fire. Beaut job by my mate. Will proof the barrel separately late in the week and report the results. I also have a nice new English .710 ball mould !
IMG_1144.jpg
 

Latest posts

Back
Top