markdwhite15
Chopper
Right, percussion
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
CLOSED TC Pennsylvania Hunter stock
- Thread starter markdwhite15
- Start date
Help Support Muzzleloading Forum:
- Status
That barrel will work in a TC Hawken stock.
markdwhite15
Chopper
Thanks, I was planning to swap it out on my Hawken as needed, but while researching the barrel specs, I decided I would like to try out the Penn Hunter stock for fit. Lost the right eye and I'm a right hand shooter. Trying out my rifles shooting left I find I can't even see the front sight on my 42" custom flintlock anymore. Have to go to a shorter barrel. I want to set one up primitive enough so I can make smoke with the other fellers if I make it to another rendezvous. Getting old sucks.
Look over on EvilBay.
markdwhite15
Chopper
Thanks, already checked today.
markdwhite15
Chopper
Still looking
I have a Lyman Deerstalker Stock never used if it will help.
markdwhite15
Chopper
Might for a different project I have in mind. Details?
Mark, It,s a 2019 stock Lyman Deer Stalker Stock. I built the barrel onto an old cabelas Hawken. Lock mortice is 51/8 X 1 inch. LOP 14 3/4 from butt cushion to trigger.15/16 barrel channel has wedge plates, trigger and trigger guard, and nose cap and tang. Mind you the hardware is what came on it so its not brass. also have the under rib for it. here,s some photos. Pm me if interested.Sm
Attachments
markdwhite15
Chopper
PM sent
Crows-R-US
Hilljack from way back
A White Mountain Carbine stock would also work for you. The only real difference in the two is one has a steel buttplate while the other has a thin recoil pad.
- Status
