• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Pitted bore?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

boker

40 Cal.
Joined
Oct 8, 2010
Messages
246
Reaction score
56
I have a T/C Cherokee. The original barrel bore is pitted pretty bad inside. I was lucky enough to fine a good replacement.

Just curious how much pitting in general effects accuracy and is there anything that can help?

Id like to get bore redone but someone had tapped it for a scope mount before I got. They did a horrible job of it so couldn’t have put a scope on it if I had wanted too.

Have shot both barrels quite a few times but never really tried to see how accurate the rifle is or could be.
 
I have 2 vintage CVA rifles that had pretty rusty and pitted barrels when I got them on the cheap.
I was able to clean up all the rust and smooth out the pits pretty good.
The guns are surprisingly accurate with a patched round ball.
In fact, last muzzleloader season, I shot a small buck with one of them. The shot was at about 40 yards.
 
@boker, the pitting can be smoothed some, but probably not eliminated. The rebore would depend a lot on how deep the holes are for mounting the scope.

Look for topics on cleaning and smoothing the bore. Accuracy may be better than one would expect, but fouling will quickly accumulate in the pitting that is left after the smoothing.
 
Pitted bores can shoot quite well but foul quickly. Bobby Hoyt can reline the barrel.
 
I had a .40 flint longrifle that had pitting in the bore but relegated to the breech. Just knowing it was there drove me crazy. I knew what to do. I sent the barrel off to Bobby Hoyt and he bored it out to .45 with the nicest round groove rifling I've ever seen. It's my favorite .45 now.
 

Latest posts

Back
Top