• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Silver wire inlay

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 26, 2021
Messages
460
Reaction score
390
Location
Victoria, Tx
Howdy, Going to be adding some silver wire inlay to a stock I'm refinishing. It's a light wood so will be staining darker. I am guessing that it's best to get all the wire inlay done before you stain. But will that discolor the silver ?

Thanks in advance
Bill
 
Howdy. I picked it up at ...
https://www.muzzleloaderbuilderssupply.com/

25270 - .010 x 36” Fine silver flat wire inlay​

.010 fine silver wire for inlay, dead soft. The height of the wire averages .050 to .055 and comes in 36" lengths.

I made my own tools to inlay the silver wire. I'll post a pic of them when I get home.
Thank you. I've been reading about it in the book "The Art of Building A Pennsylvania Rifle" and wanted to give it a try on a piece of scape wood.
 
Very easy to make the tools required with exacto blades and handles. YouTube has some good tutorials on how to make them.
 

Attachments

  • bb8647de1c42e989641a4a0f6731140b--diy-woodworking-inlay-tools.jpg
    bb8647de1c42e989641a4a0f6731140b--diy-woodworking-inlay-tools.jpg
    7.5 KB · Views: 0
I've done a bunch of it. Stain after you get all your wire in. I usually buy 6 X 6 sheet silver from Rio Grand and cut my own silver strips with a pair of scissors. I used both brass and silver wire on this one. The brass is more difficult to work with as it work hardens so fast. I have to anneal the brass wire after I cut it from the sheet.
 

Attachments

  • DSCF2262.JPG
    DSCF2262.JPG
    221 KB · Views: 0
Thanks for the information, I will definitely check them out.
It is a great site for metals, findings, turquoise, and tools. This is the outfit that the majority of the Navajo and Hopi silversmiths buy their raw material and tools from. I have been buying from them for years and finally had the opportunity to stop by their headquarters and store back in 2000, simply amazing. In their showroom, they have a clearance section and they said from time to time they have damaged sterling wire rolls and sheet, that are dinged or damaged. They never list the damaged metal on their site, so if you are ever in their area, it is a worthwhile stop. They are right on the reservation in Gallup, NM. Forgot to mention, they also carry "Grobet USA" Liver of Sulfur in a gel formulation that is used for oxidizing silver, copper and brass/bronze, to give various shades of patina for a well used antique finish. Just mix with water according to the instructions.
 
Last edited:
I've done a bunch of it. Stain after you get all your wire in. I usually buy 6 X 6 sheet silver from Rio Grand and cut my own silver strips with a pair of scissors. I used both brass and silver wire on this one. The brass is more difficult to work with as it work hardens so fast. I have to anneal the brass wire after I cut it from the sheet.
Very nice work indeed!!!
 
Hi,
Mike's (Comfortably Numb) work is fantastic. American makers tended to use thicker ribbon (it is really ribbon rather then wire) 0.008-0.012" thick and that is fine. However, on British or European guns the thickness is usually much less, 0.004-0.006". For that thin wire, you really have to buy flat sheet and cut out the ribbons using shears.
7Dkq6V1.jpg

gt6bVE8.jpg

Then just pinch the ribbon between 2 coarse files, pulling it through with pliers and it will be straightened and scored by the files, ready for use.

dave
 
Some folks insist on filing the edge on one side into a knife edge to assist in driving the wire into the wood. I have never found it needed. Some folks seem to think glue is need to hold the ribbon in place as well....I don't know why that is. Also, your wire job is only as good as your design is. Make sure you have everything right before you stab in. Also, American work in the old days didn't just put a squiggle or two off of carving like you see on a lot of carving today.
 

Latest posts

Back
Top