• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Sparrow Pistol- a challenge awaits

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 11, 2011
Messages
4,364
Reaction score
10,877
Location
Surry County, North Carolina
The "Sparrow" pistol kit from MBS arrived today. Everything looks good and like a straight-forwards kit build... Except for one little thing.. the Butt Cap!
I am imagining how I will go about installing this diabolically grinning butt-head. I know in-letting it will be painstaking and that's ok. But that casting stem sticking up out of the bowl needs to go (these caps are screw-attached with one passing through the mask's mouth into the stock) and I have no idea how to do it. I imaging cutting as much as I can get to with a small hack saw and then using a small ball grinder perhaps? I'm just guessing here.
If anyone has done one of these could you give some hints as to how the best way to approach it would be?
Muchly appreciated,
Bob
 

Attachments

  • Sparrow 1.jpg
    Sparrow 1.jpg
    973.9 KB · Views: 12
  • Sparrow 2.jpg
    Sparrow 2.jpg
    465.5 KB · Views: 0
  • Sparrow 3.jpg
    Sparrow 3.jpg
    245.6 KB · Views: 0
  • Sparrow 4.jpg
    Sparrow 4.jpg
    509.3 KB · Views: 0
Diabolical !!
l suggest that you hold the stem firmly and drill down through the center then cut it off using a riffler file.
Or are you lucky and the stem is directly behind the mouth screw hole position?
Diabolical indeed! The stem unfortunately isn’t near the location for the screw hole. Not sure about the drilling idea… but we’ll see…
 
Last edited:
As Bud said a Dremel with a cutoff disc .Purchase a kit with a adjustable speeds that is one tool you will never regret buying the two size sanding drums are handy for the hard to reach curves and there are a bunch of attachments like a router base and a mini drill press stand available as well as numerous bits wood and metal and polishing wheels to polish that brass
 
As Bud said a Dremel with a cutoff disc .Purchase a kit with a adjustable speeds that is one tool you will never regret buying the two size sanding drums are handy for the hard to reach curves and there are a bunch of attachments like a router base and a mini drill press stand available as well as numerous bits wood and metal and polishing wheels to polish that brass
Yup, been using one for over twenty five years or so 😉
 

Attachments

  • cap 2.jpg
    cap 2.jpg
    141.9 KB · Views: 0
  • cap 4.jpg
    cap 4.jpg
    175.2 KB · Views: 0
  • capp 2.jpg
    capp 2.jpg
    134.3 KB · Views: 0
  • capp 4.jpg
    capp 4.jpg
    159.4 KB · Views: 0
I believe this was the original gun bought for the movie. They refer to it as the "Perry London" pistol. I wanted this pistol in the worst way many many years ago, but came to the conclusion that I had no skill to actually build one. Going from memory, the original pistol was purchased from a New England gun shop by the producer. The original was given to a well known builder (Kennedy???? maybe) who built 2 or 3 copies for the actual movie. There were also a couple hard rubber stunt guns made. Anyway, the builder either shared an extra copy he made for himself or detailed notes with someone who tracked him down. That person made up kits for the pistol. I remember seeing the kits at Dixon's Gunmakers Fair. I even took his buisness card that I might actually still have, but I think he is no longer in business. MBS is the only one who makes this that I know of although one could source out individual parts. There was also a plastic exact replica that I think they made a limited amount of. It came in a wall hanger case and was supposed to be cast off of the original.

I'm super excited to see one being built!

I wish you the best of luck in completing it!!!!!!

Ed
 

Attachments

  • master_flintlock_ref.jpg
    master_flintlock_ref.jpg
    131 KB · Views: 0
I believe this was the original gun bought for the movie. They refer to it as the "Perry London" pistol. I wanted this pistol in the worst way many many years ago, but came to the conclusion that I had no skill to actually build one. Going from memory, the original pistol was purchased from a New England gun shop by the producer. The original was given to a well known builder (Kennedy???? maybe) who built 2 or 3 copies for the actual movie. There were also a couple hard rubber stunt guns made. Anyway, the builder either shared an extra copy he made for himself or detailed notes with someone who tracked him down. That person made up kits for the pistol. I remember seeing the kits at Dixon's Gunmakers Fair. I even took his buisness card that I might actually still have, but I think he is no longer in business. MBS is the only one who makes this that I know of although one could source out individual parts. There was also a plastic exact replica that I think they made a limited amount of. It came in a wall hanger case and was supposed to be cast off of the original.

I'm super excited to see one being built!

I wish you the best of luck in completing it!!!!!!

Ed
Thanks for that information Ed! I hadn’t known that much except that the original was used and.fired on the set. It was a Perry as you said. There were copies also made for props but didn’t know much about them.
It’s a handsome looking pistol and I hope I don’t screw this up 🥹
 
Looked for any tutorials on in-letting this type of butt cap. Narry a one to be found. So I am planning to begin with the back strap and start inletting it upwards.
I know this step in the build should not be done first, but I am thinking that if I do it later on in the build and screw it up (which is a good possibility), then all my previous work will have been in vain. So I will begin here, installing the butt cap.
 
Last edited:
I used to teach bronze casting at the local university. Looks like you got it solved. Lots of prussian blue or inletting black and if you draft or bevel the inside of the butt cap you can "ease it in" on the inletting. A Foredom flex shaft is costly but works well. A friend bought a used dentist's drill and uses it in place of a Dremel. Keep us posted on the pistol's progress.
 
Hi folks- a brief update on the Sparrow pistol:
I spent the day working on the butt cap. It's not fun but it's a challenge and learning opportunity. After about eight hours I got the cap on about as well as I can, going at it without any guidance or tutorial. With a bit more work I can get some of those gaps closed I think. Some more wood has to come off the back hump above the cap, but I do like the sleekness of this pistol. Here are a few pics of today's work:
 

Attachments

  • a.jpg
    a.jpg
    360.3 KB · Views: 0
  • b.jpg
    b.jpg
    303.4 KB · Views: 0
  • c.jpg
    c.jpg
    423 KB · Views: 0
  • d.jpg
    d.jpg
    567.8 KB · Views: 0
  • e.jpg
    e.jpg
    748.3 KB · Views: 0
Back
Top