• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Feedback on powder charge

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
In reading this thread, I still have to shake my head at the misconception that if a lot of powder is good, then even more is better. Shot placement is extremely important and poor accuracy can only spoil a perfectly aimed shot. I tell all my students to start low with charge levels, work up by 3gr increments and look for the group to shrink and then open back up as you increase the powder charge. Then go back to where the group was smallest and start tweaking it from there. Guns are different and what's in the books might not be the best load for your rifle, you'll have to experiment.

For a .45 using 3f Swiss, I'd start with 50gr and go from there.
 
If you overcharge because it just doesn't seem like enough you are more than likely blowing unused powder out on the ground. Accuracy is the most important item in the equation
 
In reading this thread, I still have to shake my head at the misconception that if a lot of powder is good, then even more is better. Shot placement is extremely important and poor accuracy can only spoil a perfectly aimed shot. I tell all my students to start low with charge levels, work up by 3gr increments and look for the group to shrink and then open back up as you increase the powder charge. Then go back to where the group was smallest and start tweaking it from there. Guns are different and what's in the books might not be the best load for your rifle, you'll have to experiment.

For a .45 using 3f Swiss, I'd start with 50gr and go from there.
Totally agree.

And as to the.45, mine seem to all settle in right around 55-60 grains of fffg.
 
Back
Top