- Joined
- Aug 27, 2004
- Messages
- 2,986
- Reaction score
- 6,381
It does look lopsided, but how does it shoot? If you don't like the appearance, I suggest you crown it. It does not look like there is much if any there now. (Crown)
Larry
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Anyone else thinks this looks like manure?
- Thread starter .36Rooster
- Start date
Help Support Muzzleloading Forum:
Larry
golden sky
40 Cal
- Joined
- Nov 5, 2021
- Messages
- 239
- Reaction score
- 145
its a 5 minute job to recrown and tru up at your local machinist shop
Yeah, thats what I'm getting at...i think the solution is to trim back the muzzle an 8th or 16th inch. There is a loading lever latch to worry about so i can't go too far back...the next loading lever assembly available in size is for a 5" barrel and i want to keep it at 7.5"...
Whether it originally came from factory defective, muzzle/ramrod wear, or contact with a rock at some point while squatting down along the river fishing, i posted this thinking a crown job was in order. But i am not sure how to go about it with hand tools...was hoping one of these guys with all the good jokes would have some experience with it and provide some insight on the process.
golden sky
40 Cal
- Joined
- Nov 5, 2021
- Messages
- 239
- Reaction score
- 145
strip it down and post a pic of the full assembly, it might fit in a large 4 jaw chuck on an engine lathe...
My rather snarky post, now that I reread, it was a smart a.. reply, apologies to the Op. was an attempt at pointing that out.
Im amazed at the accuracy of these guns. I own north of 20 of them in various models. Priced to sell at sometimes half the price of modern revolvers they can run with the best in the accuracy department. Yet we read complaint after complaint on fit and finish.
JCKelly
45 Cal.
I once had a Pietta revolver that was, in my opinion not theirs, mechanically defective. Not much problem getting a refund.
Oh, do sent it back before you mess around with it
Oh, do sent it back before you mess around with it
- Joined
- Aug 27, 2004
- Messages
- 2,986
- Reaction score
- 6,381
If you choose to try and crown it yourself, versus go back to factory (if possible) this is all I use below. No big deal for me. A die hard machinist will most likely have a hiccup over my suggestion as it is not perfect, only as good as your ability.
Larry
How does it work?
- Joined
- Feb 13, 2020
- Messages
- 2,828
- Reaction score
- 6,172
Put a larger caliber lead ball on the muzzle and hammer it partially into the muzzle. Tap it out from the breech end and examine it see the true shape of the muzzle.
Rudall
40 Cal
The OP has shot this pistol thousands of times and is only worrying about this problem now?
I had a cheap brass bullet mold one time that cast out-of-round conicals but the round ball hole was ok. Maybe it was meant for your gun. It went "bye-bye" at a gunshow.
rdane
40 Cal
If you have used it as much as you say, then why complain about now?
Coinneach
58 Cal.
- Joined
- Oct 19, 2021
- Messages
- 2,403
- Reaction score
- 4,442
- Location
- Far Away Downs Queensland Australia.
You must be an Aussie "She'll be right mate" !
Brokennock
Cannon
What the heck is wrong with you people?
If you don't have something helpful to add, why don't you just shut it?!
The man asked for people's opinions.
Maybe he was hoping to affirm his suspicions, or have someone give him different idea. Maybe it is something that has been nagging at him for a while and he finally decided to ask about it.
You must be the type of folks who speak just to hear their own voice, with nothing to say worth listening to.
If you don't have something helpful to add, why don't you just shut it?!
The man asked for people's opinions.
Maybe he was hoping to affirm his suspicions, or have someone give him different idea. Maybe it is something that has been nagging at him for a while and he finally decided to ask about it.
You must be the type of folks who speak just to hear their own voice, with nothing to say worth listening to.
Brokennock
Cannon
In topics/discussions where it has come up, I have always been against the "lead box." But I think I've found my 1st three to go in it within this one topic.
I dont know, Brokennock.
All I got to say is that it's the internet, i guess; And for the several people who've commented despite not having any useful insight on muzzle crowning, then i can't really help them keep from making themselves look bad...this is a thread asking for advice from people with technical experience in muzzle crowning issues. And as far as im concerned, all these wisecracks, and clever remarks are being made in the absence of any actual knowledge.
Anyways, I am just going to get on brownells, and browse through their hand tools, and see if I can find anything I can buy and figure out how to use for myself. Its my gun.
All I got to say is that it's the internet, i guess; And for the several people who've commented despite not having any useful insight on muzzle crowning, then i can't really help them keep from making themselves look bad...this is a thread asking for advice from people with technical experience in muzzle crowning issues. And as far as im concerned, all these wisecracks, and clever remarks are being made in the absence of any actual knowledge.
Anyways, I am just going to get on brownells, and browse through their hand tools, and see if I can find anything I can buy and figure out how to use for myself. Its my gun.
Scota@4570
54 Cal.
- Joined
- Nov 25, 2019
- Messages
- 1,725
- Reaction score
- 2,090
I have tuned up three Pietta 1858s. All had micky mouse uncrowned muzzles. The best way to crown any barrel is with a lathe. Center it, make sure the bore it pointing right at the tailstock. Take light cuts. I use a sickle shaped cutter to make a progressive angle crown. Yes it can be done with a piloted cutter. You will need a pilot of the exact size though. Hacksaw, file and abrasive ball jobs are makeshift. I am not saying it won't work, just that there is no guarantee that the crown is dead straight to the bore. IF that was the only option, I'd stick with the Pietta "crown".
Before removing any of the barrel's length, why not crown it as it is? That should make it look good.
Are you saying it's not particularly accurate at 25 yards?
It's easy enough to remove the cylinder, shine a light through it and give us a photo of what you see.
Are you saying it's not particularly accurate at 25 yards?
It's easy enough to remove the cylinder, shine a light through it and give us a photo of what you see.
Hi Rooster, There's nothing wrong with Oval bores so long as there is No rifling in the bore apart from the twist in the Oval.. Charles Lancaster(London 1815----> made lots of them . Shot quite well out to 1000yds. They where of course made on purpose that way in UK. OLD DOG
Old Hawkeye
50 Cal.
- Joined
- Mar 14, 2020
- Messages
- 1,074
- Reaction score
- 1,932
Brownell's has what you need. Look for rifle/handgun muzzle & cylinder facing & chamfering tools. They turn by hand & you just get the pilot to match whatever bore diameter you have. They come in both 90 degree to square up muzzle & 45 degree cutters to give a recessed crown.
