• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Charcoal

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mtsage

36 Cl.
Joined
Aug 8, 2021
Messages
81
Reaction score
88
Location
Great Falls, MT
Remember the rules when, about making BP. No formulas to be mentioned or how to make said. This thread is only about charcoal. Stay on topic please. Would hate to see anybody get yelled at by Admin or another member.

That being said, I have made some charcoal from willow. Bark was peeled, place in 1 gal. paint can and placed on fire. All looks well for finished product.

Here is my question. How long should a stick of char stay burning (lite) when lighted with a flame? Should it stay lite forever, for a few moments, only when air is blown on it? And is any of the length of time it says lite a judge of the quality of the char itself. In light of the that question, what is a good qualification for finished product (char that is)?
Thanks
mtsage

IMG_5093.JPG
 
I don't know the chemistry of this but have made lots of charcoal. Mostly in 5 gallon cans for use in the forge, from limb trimmings of alL species that grow near me and from hardwood flooring scraps. I have avoided resinous woods because of gummy residue. Not much willow close to my house but lots of wild grape, so I have made that into char for experimental purposes in gallon paint cans. Back to quality, I would think that you would have to determine the ink abomineral content of the ash after complete combustion as well as the caloric value of the burn. Too much to think about. The only test I make is to break a couple of the largest sticks to make sure that they are completely chatted to the center.
Dave
 
Ok, a few weeks ago I was walking through Mejer's stores and saw a section with charcoal brickets and one of the bags said "no additives". Kingsford brand if you want to check it out. Just a thought, I might get it wrong, usually I do. Wife says I do.
 
That was a pretty loaded question I asked. After thinking about all the possibilities I guess I will just say that probably the best answer will be when I have venison on the table from my muzzleloader. Thanks
 
Ok, a few weeks ago I was walking through Mejer's stores and saw a section with charcoal brickets and one of the bags said "no additives". Kingsford brand if you want to check it out. Just a thought, I might get it wrong, usually I do. Wife says I do.

Charcoal Briquettes are made from bits of charcoal, coal, sawdust, sodium nitrate, and use starch as the binder. They are consistent in burn rate and are cheaper than hardwood charcoal, so barbeque folks like them. They don't really work well for forge or formulas.

LD
 
Interesting post, I have never made charcoal that way. I always used to build a fire in the ground and then cover it with the dirt. I have discovered that my Weber Kettle makes good charcoal also. Get a good fire going and then cover it and shut the vents. My older Brother made BP when we were kids using charcoal briquettes. We mainly used it for crude rockets or flares but it seemed to work real well.
 
My kids recently got me into making charcoal for fun projects. I had read somewhere that pine did okay for charcoal. Here, our "pine" is doug fir framing lumber (from OR, I believe) or 1x dimensional. That first batch with framing lumber was pretty unimpressive. Does anybody happen to know if framing lumber does okay and I just didn't mix it long enough? Or is the species not very useful for our purposes?
 
Cut it split it and dry. Them debark and make into kindling fill a paint can tight poke a few holes in the lid and set it in a good fire with a coal bed. Wjem flames stop coming from the vent holes its done. Pull it out and cover with a damp cloth . when cool grind it in a coffee grinder . theme it ready .
What does the Wife(partner) say about ?? :ghostly: .O>D>?
 
Back
Top