• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Does anyone know who does charcoal bluing ??

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I believe I am as well a 'victim' of poor 'charcoal bluing' on this 'old' CVA replica '51 Navy Colt I bought NIB many years ago.

I say 'old' because I didn't realize CVA even offered handguns and only thought they sold rifles back 'in the day' but apparently they did and mine is marked 'ASM' as the Mfg.

Regardless I was 'sink washing' the barrel and this was the result! I have been shooting it many years like this but I am planning on 'oil blackening' it soon. I have oil blackened many small parts and screws and this will be the 'biggest' thing I have ever tried.
 

Attachments

  • IMG_1868.JPG
    IMG_1868.JPG
    133.8 KB · Views: 35
I new I wasn’t crazy when the Dish Washing soap turned my charcoal pistol ugly also, I will get a pic of mine and post it also. Thank you for putting this out there …
 
Who Cleans their pistols in a Dishwasher. Too lazy for a bit of Dirty work?? Serves you well. O.D.
Charcoal blueing is not difficult,Just time Consuming, Hot and Dusty. All you need is crushed charcoal,an airy shed,Polishing material,Tow and an iron or an old marble washstand table topand a heat source,Gas ring or the like.. AND lots of time..OLD DOG..
 
I do not think anyone cleaned there firearm in a dishwasher per say only used Dish Soap by hand…..P.S Who Would Do That…
 
Who Cleans their pistols in a Dishwasher. Too lazy for a bit of Dirty work?? Serves you well. O.D.
Charcoal blueing is not difficult,Just time Consuming, Hot and Dusty. All you need is crushed charcoal,an airy shed,Polishing material,Tow and an iron or an old marble washstand table topand a heat source,Gas ring or the like.. AND lots of time..OLD DOG..
Sorry,I forgot the Large quantity of powdered dry lime.. O.D.
 
I FOUND IT!!!!

I'll be honest with you, it was a bit harder than I had expected. These guys are GREAT through!

https://fordsguns.com/
47573307_10212852142086367_5273335114879729664_o-1920w.jpg


And here is their "fire blue" which would be the same thing as Uberti charcoal blue.

20190415_090206-1920w.jpg




But I've searched for all morning at this point (3 hours) through my researching and if you want a TRUE charcoal bluing your options are limited. Many and including Uberti/Pietta are not true charcoal bluing, they are immitation. True charcoal bluing can range from looking just blued to a bright blue finish depending on the underlining metal polish. Ultimately you need to decide not just what finish you want but what you really want to invest in this revolver. Doesn't seem sane to invest $400 finish in a $200 revolver.
 
Last edited:
I FOUND IT!!!!

I'll be honest with you, it was a bit harder than I had expected. These guys are GREAT through!

https://fordsguns.com/
47573307_10212852142086367_5273335114879729664_o-1920w.jpg


And here is their "fire blue" which would be the same thing as Uberti charcoal blue.

20190415_090206-1920w.jpg




But I've searched for all morning at this point (3 hours) through my researching and if you want a TRUE charcoal bluing your options are limited. Many and including Uberti/Pietta are not true charcoal bluing, they are immitation. True charcoal bluing can range from looking just blued to a bright blue finish depending on the underlining metal polish. Ultimately you need to decide not just what finish you want but what you really want to invest in this revolver. Doesn't seem sane to invest $400 finish in a $200 revolver.
Yet people will put 5000.00 engraving on a 1000.00 pistol… Gary Barnes does charcoal bluing as well I believe. I’ve never used him but seen some of his work and he’s a meticulous craftsman.
 
It would be nice to have money to burn hell I would get the Dog Blued , LOL But that is some really nice finish work WOW…
 
Yet people will put 5000.00 engraving on a 1000.00 pistol… Gary Barnes does charcoal bluing as well I believe. I’ve never used him but seen some of his work and he’s a meticulous craftsman.

I think a nice engraving on any gun that has heritage and collectibility in it's history is perfectly logical. However when we are talking a clone gun IMO it is hard to justify much "improvement" in it appearance wise. Then again, here I am with some clone guns with some nice Giraffe bone grips on them so maybe it best if I just shut up. :doh::D
 
I FOUND IT!!!!

I'll be honest with you, it was a bit harder than I had expected. These guys are GREAT through!

https://fordsguns.com/
47573307_10212852142086367_5273335114879729664_o-1920w.jpg


And here is their "fire blue" which would be the same thing as Uberti charcoal blue.

20190415_090206-1920w.jpg




But I've searched for all morning at this point (3 hours) through my researching and if you want a TRUE charcoal bluing your options are limited. Many and including Uberti/Pietta are not true charcoal bluing, they are immitation. True charcoal bluing can range from looking just blued to a bright blue finish depending on the underlining metal polish. Ultimately you need to decide not just what finish you want but what you really want to invest in this revolver. Doesn't seem sane to invest $400 finish in a $200 revolver.
Looks a little like Clarks “Melted” pistols.
 
Back
Top