-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
GOEX PLANT
- Thread starter Gvilleddie
- Start date
Help Support Muzzleloading Forum:
- Status
I had the same results as you with Pyrodex and for flintlocks I used a tablespoon on their pistol powder to grind it finer and it worked 90% of the time in the cheapest CVA flint pistol
They've already moved one or two topics to the politics section where the majority of users can't discuss this issue because people keep bringing up politics. Please for the love of the discussion and this forum, stop bringing up politics, I actually care to talk about this subject without people's personal political beliefs.
We know the cause of the closure which has nothing to do with agencies, government or otherwise. Unless you would like to provide an article or source explaining why the BP industry is directly been affected by them?
It could just simply be lack of interest in our Niche hobby of antique weapons, and a factory fire.
80% of this thread was related to some one else getting into making BP and I stated the govt roadblocks to that. they drove many companies overseas and halted making lead used in ML bullets. so it seems to me there are some retired or active member of these govt agencies
Hopefully Schuetzen powder can pick up the slack and keep down the price. Unfortunately when some companies become the only game in town they raise the price. Hopefully Schuetzen does not.
You may know if this is correct. Saw on a YouTube video that the US military uses about 1 million pounds of black powder a year. I do know that black powder is used in fuses and things like that.Is the million pounds way off the mark or do you even know? Thanks in advance.
Companies moved over seas because making things and paying pennies in labor is cheaper then paying Americans who have a higher standard of living. I think Apple pays its factory workers something like $1.62 an hour to make our phones. You can't beat that price and government has nothing to do with it. Offloading morally questionable wages to non-Americans has been a staple of our industries for decades. I'll resign in this conversation because its a huge rabbit hole.
- Joined
- Jan 15, 2009
- Messages
- 2,678
- Reaction score
- 2,720
A poster on one of the Goex links mentioned that a piece of quartz probably caused the 2011 explosion at Goex. Where did the piece of quartz come from? Maybe it came from floor sweepings being tossed into the batch.
"The plant had recently re-qualified a very detailed Process Safety Management plan, which included a hazards review as required by industry standards. Goex also maintained a strict series of Standard Operating Procedures designed to regulate step-by-step activities during the manufacturing process. However, the results of this investigation have highlighted certain structural shortcomings in their procedures that have since been corrected. Due to the obvious risk of foreign contaminants, floor sweepings should not be incorporated back into the manufacturing process. In addition, any equipment that rotates or otherwise imparts mechanical energy to explosives should be x-rayed or otherwise tested in a non-destructive manner to confirm that there are no occlusions, voids or other latent defects before it is placed into service. A regular non-destructive examination and requalification of the equipment should also be incorporated as part of the preventive maintenance program. The Process Safety Management plan and Hazards Review should include a What-if analysis to explore the effects of equipment failure in operations where energy is imparted to explosive materials. The authors also reiterate certain NFPA 495 requirements that, in their experience, have not been consistently followed by industry and have caused explosions at other facilities. All explosives manufacturing and process areas should be regularly swept and kept clean, dry and free of grit, paper, empty packages and other assorted rubbish. Non-sparking tools should be used during all aspects of the manufacturing process, including housekeeping, and any floor sweepings should be disposed of in a manner approved for the explosive product itself. All collection systems should be cleaned at a frequency that eliminates hazardous concentration of explosives dusts or powder from accumulating in pipes, tubing and ducts or within hidden compartments. Finally, any explosive materials or residue should be removed from process equipment and the immediate surroundings before hot work or repairs that might produce heat sparks or flame is performed in the area."
Microsoft Word - F3EDA668.doc (freeshell.org)
"The plant had recently re-qualified a very detailed Process Safety Management plan, which included a hazards review as required by industry standards. Goex also maintained a strict series of Standard Operating Procedures designed to regulate step-by-step activities during the manufacturing process. However, the results of this investigation have highlighted certain structural shortcomings in their procedures that have since been corrected. Due to the obvious risk of foreign contaminants, floor sweepings should not be incorporated back into the manufacturing process. In addition, any equipment that rotates or otherwise imparts mechanical energy to explosives should be x-rayed or otherwise tested in a non-destructive manner to confirm that there are no occlusions, voids or other latent defects before it is placed into service. A regular non-destructive examination and requalification of the equipment should also be incorporated as part of the preventive maintenance program. The Process Safety Management plan and Hazards Review should include a What-if analysis to explore the effects of equipment failure in operations where energy is imparted to explosive materials. The authors also reiterate certain NFPA 495 requirements that, in their experience, have not been consistently followed by industry and have caused explosions at other facilities. All explosives manufacturing and process areas should be regularly swept and kept clean, dry and free of grit, paper, empty packages and other assorted rubbish. Non-sparking tools should be used during all aspects of the manufacturing process, including housekeeping, and any floor sweepings should be disposed of in a manner approved for the explosive product itself. All collection systems should be cleaned at a frequency that eliminates hazardous concentration of explosives dusts or powder from accumulating in pipes, tubing and ducts or within hidden compartments. Finally, any explosive materials or residue should be removed from process equipment and the immediate surroundings before hot work or repairs that might produce heat sparks or flame is performed in the area."
Microsoft Word - F3EDA668.doc (freeshell.org)
- Joined
- Jun 17, 2019
- Messages
- 6,778
- Reaction score
- 7,685
Just wish I had logged in more 1F for my Bess! Big 3/4" bore like that needs beefy powder!
- Joined
- Jun 17, 2019
- Messages
- 6,778
- Reaction score
- 7,685
They use lots of black powder overseas, so hopefully we will see imports increase here in US.
Brokennock
Cannon
You don't call,
Politics?
And politics meant to start trouble at that.
You don't want me waving my flag?
Then why don't you go someplace with a different flag and stay there
zimmerstutzen
70 Cal.
- Joined
- Apr 2, 2009
- Messages
- 5,845
- Reaction score
- 1,198
When I started muzzle loading, minimum wage was $1.60 an hour, and I had a part time security job that paid $3.20. But unlike today, many people actually worked for minimum wage. Convenience stores here are paying $18.00 an hour and minimum wage is $7.75. Nobody works for minimum wage around here today. Heck my step son is getting $15 an hour to go to plumbing school. (Imagine, employers so hard for employees they pay them to go to school for several months before they ever do a thing to make money for the company.) However, in 1992, I purchased 5 five pound bags of black powder for $3.00 a pound. I stocked up a couple years ago and I am good for a bit.
However. Powder is still far cheaper in Germany. Todays price at Pfnurer's gun shop outside Berchtesgaden is 24 Euros for a kilogram of Wano. (Made in Germany) That includes their value added tax. The current exchange rate is 1 Euro = $1.16 US. so $27.84 for a kilogram. A kilogram is 2.2 pounds, so it works out to $12.65 cents a pound, including the VAT tax.
Well, that's just plain un-American! We should be getting powder for less than Europe!
Tenring
45 Cal.
- Joined
- Aug 7, 2021
- Messages
- 806
- Reaction score
- 711
The shops that sell BP an hour from me cut the powder sale down to 1 pound per person per day until it’s gone walk in only. I at least picked up 2 before there mandate. I am done no more driving for me, between gas and tolls it’s not worth it.
Not everyone has the same beliefs. I have disagreements with many the statements people have made here but I try and keep them to myself. This forum is for the discussion of the hobby, not around the hobby and in the country. Rules exist for a reason, we can't just break them because we personally disagree. This is after all a privately owned forum, the people running it can do whatever they like. Freedom of speech only applies between people and the state, not between people, never has.
Sam squanch
62 Cal.
- Joined
- Oct 9, 2019
- Messages
- 2,727
- Reaction score
- 3,721
I’d just buy up the flintlocks people sell cheap and sit back. Black powder will make a comeback. I know more folks shooting cap and ball revolvers now than in the last 30 years. The demand is there, when the cartridge demand is caught up, muzzleloading stuff will catch up too.
Not everyone has the same beliefs. Yet we come here to extoll
I am glad your content.
discussion of the hobby includes all the factors that may affect it. Am I wrong?
- Status
