• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD SOLD.....Fullstock Hawken .50 percussion

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

GANGGREEN

45 Cal.
Joined
Dec 16, 2007
Messages
1,296
Reaction score
530
Location
Coudersport, PA
I built this from a TOTW kit a number of years ago. I'm reasonably sure it was a Green Mountain barrel and Siler percussion lock. The stock is really quite beautiful and otherwise the fit and finish of the parts is pretty good. It's a roundball twist, but I've had OK consistency shooting a few Hornady PA bullets over a felt wad with it as well. One of the wedge keys has been replaced and is a bit proud on one side (which I may "fix" before shipping) and that's really the only thing wrong with it. It has light handling and wear from normal use, but really hasn't been afield very much, so there are no noticeable scratches, dents, etc.. The barrel is 1" straight by 36" long. Length of pull is 14.375" and I THINK the gun weighs roughly 9.5 pounds. If anyone needed to know specifically, I'd be glad to go weigh it for you.

I'd like $1150 for it including shipping in a custom wood crate. If anyone is close enough to meet me for pickup, I'd charge $1050 without shipping (shipped a gun yesterday and was shocked at the cost through USPS).

Hawken 1.jpgHawken 2.jpgHawken 3.jpgHawken 4.jpgHawken.jpg
 
I think the overall length is 54", but it's got a 36" barrel. Maybe 52" overall, I was building a shipping crate yesterday and think 54" was my outside dimensions, so likely it would be slightly less than that. I'll confirm and post the answer here when I'm able (sometime this afternoon).

Hooked breech, yes, I think so. Honestly, I built it a long time ago and don't shoot it much, nor have I ever removed the barrel, but my recollection (which isn't always great) was that I spent a good bit of time fitting the hooked breech, getting the tang/breech inlet, etc.. I don't have access to the rifle right at the moment, but I can surely run it out to the shop and pull the barrel to confirm for you, I'll try to do this today as well.
 
Status
Not open for further replies.

Latest posts

Back
Top