• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What period would this Old Pakistan made knife fit into ?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sgtprovo

45 Cal.
Joined
Sep 10, 2019
Messages
888
Reaction score
257
Location
Summerfield, FL 34491
frontier_knife1.jpg
 
By golly, that thing actually looks pretty cool. You might get away with it calling it a cowboy Bowie knife, but otherwise, there's not much historicity there.

Pakistani knives were always worse than useless. The stainless steel is soft and gummy, with no edge holding ability. I never even could get them sharp at all (and I had a bunch!). If you can get it sharp, and keep it sharp, then you've got something, but I expect you'll be disappointed in your efforts.
 
It does bear a lot of resemblance to a New Mexican belduque. There are several of these shown in Jim Gordon's knife book. Put it in a proper sheath and only pull it out when you need it, and it might work for a southwestern trapper or plainsman.

I would consider it no less authentic than some of the fantasy knives that are being passed off as "period correct." You see 5" knives with maple handles and square butts being called "English trade knives." The same thing with a round butt is called a "French trade knife." A lot of these are actually pretty serviceable knives, but they just aren't what they are purported to be.

I don't mean to offend anybody... Just giving an honest opinion.

Notchy Bob
 
If you mess up the blade "trying" to sharpen it you can replace it on Clay Smith's site. Less than $30 brand new.
 
Back
Top