• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

wanting to make 28ga inline smoothbore

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

R.Boone

32 Cal.
Joined
Aug 1, 2018
Messages
8
Reaction score
1
I have an old knight inline that someone mistreated , I want to bore out to make a 28 ga. .Can I bore it out with a 35/64 bit welded to a rod and held in place with a vice or would I also need to use a reamer to smooth out the bore? Comments please.
 
armourers square reamer would be slow but would do the trick! plus it wudn't bite in and drift on you either. Lots of oil and patience..

Respect Always
Metalshaper/Jonathan
 
Status
Not open for further replies.
Back
Top