-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
custom barrel makers?
- Thread starter chazz1975
- Start date
Help Support Muzzleloading Forum:
Rice will generally make anything you want. Just provide the measurements or send them the current barrel to duplicate. You may also want to check Track and a few otehr retailers, they may have the barrel you need already in stock. There are also a lot of CVA barrels on Ebay.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,343
why not just buy a new Mountain Rifle barrel from Deer Creek? available in flint or cap in either 45 or 50 caliber and at $115.00 bucks plus whatever the sights & under-rib adds to the price will likely be no more than you'd spend just on a blank to have one made.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,343
a couple thicknesses of maskin' tape on the bottom half of the barrel will take up the little bit of slack involved, if it's even a problem in the first place. I've seen people use T/C Hawken barrels in Renegade stocks with no problem.
galamb
58 Cal.
I'll second Oregon Barrel - they will make what you need and do it quickly and reasonably. You can even pick your twist rate, rifling depth etc.
