8-32 or 10-32 thread

8/32 or 10/32 thread for a range rod and stuff, which is better?

I don't know ...but it drives me crazy....some stuff is 10/32 some 8/32 I even have ramrods threaded for both.... :cursing:

You can guarantee that whatever I grab is the wrong thread......

I prefer 10/32 simply because it is stronger. For steel threads it really doesn't matter , but on brass threads it can matter. So on all ramrod or range rods I make I use 10/32 unless 8/32 is requested. :idunno:

I have used 8-32 for 25 plus years with no failures. But I would not use acessaries with male brass threads as brass will eventually work harden and break, either 8-32 or 10-32. BJH

I faced the same conundrum when decided to make a long range rod for use as the Armourer for International Competition and wanted all the threads the same. Since in that usage, there often is high stress to do it correctly and very quickly, I also wanted the least possible chance of breakage and chose 10 x 32. It took a bit of looking around to keep accessories that fit anything from .32 cal. on up in that thread size, but it was not very difficult.

Gus

My range rod is threaded for a 10-32. I have a size 10 to a size 8 adapter if I can't find 10-32 accessories. I then use 8-32 stuff if I need to. Most muzzle loading caliber size brushes and jags are 10-32 threads.

10-32 on all my stuff.

Whatever you pick, Id recommend sticking with just one for everything. It's very easy to get them mixed up having both, and might make you question your cognitive abilities when going to order an attachment trying to remember which thread for which rod and such.

I have similar problems to Colorado Clyde, except mine's when I'm at a store - always get the wrong size.

Whatever you pick, Id recommend sticking with just one for everything. It's very easy to get them mixed up having both, and might make you question your cognitive abilities when going to order an attachment trying to remember which thread for which rod and such. :rotf:

I have similar problems to Colorado Clyde, except mine's when I'm at a store - always get the wrong size.

My builds have a RR w/ one end #10-32 and the other #8-32......Fred

SgtErv said:

Whatever you pick, Id recommend sticking with just one for everything. It's very easy to get them mixed up having both, and might make you question your cognitive abilities when going to order an attachment trying to remember which thread for which rod and such.

I have similar problems to Colorado Clyde, except mine's when I'm at a store - always get the wrong size.

Click to expand...

:thumbsup: Its the bane for all of us...and don't forget 8-28 :haha:

flehto said:

My builds have a RR w/ one end #10-32 and the other #8-32......Fred

Click to expand...

Same here - all my range rods have 8-32 on one end and 10-32 on the other. I've even got adaptors that go from one size to the other ...

or 10/24 :cursing:

SgtErv said:

I have similar problems to Colorado Clyde, except mine's when I'm at a store - always get the wrong size.

Click to expand...

Happens to me too....misery loves company. :haha:

Muzzle loading stuff is MOSTLY 10-32 and modern stuff is 8-32 except for the very very SMALL bore modern stuff like pellet gun cleaning rods.

I'll echo what everyone else has already said. Stay with one or the other.

I, like most other's prefer 10/32( Steel threads )

Respectfully, Cowboy

Thank you for your help. Will be going with 10/32.

I always wondered why in the heck two are offered. Does one have a particular advantage or use that the other doesn't?

I use 10-32 for the obvious reason that it is stronger and therefore a little more durable and forgiving.

I always wondered why in the heck two are offered. Does one have a particular advantage or use that the other doesn't?

Click to expand...

For the same reason different flints are sold....

Unless the threads are partly stripped or in poor condition {can happen w/ soft brass}, either thread will suffice.

The reason I have #8-32 on one end and #10-32 on the other when the RR has 2 tips, is that jags, wire brushes, etc. are still sold w/ both threads.

Some shooters use a longer utility or range rod when cleaning and on this rod can choose whatever thread they prefer.

Also there are adapters and length extenders to convert from one thread to another.

Don't think one thread is better than the other....both will do the job. It's just a matter of personal preference on thread size or the thread size that's on either or both ends.....No big deal.

One caveat....ensure that the RR tip is pinned and that the jag, etc. has a steel set screw....integrally threaded brass can break off and isn't as durable as steel....Fred