Roundball:You will be very happy with a ramrod from B&H tool co.I have two of them and they are an excellent product.No they are not "traditional"but I am not a big fan of large wood splinters in and through my hand.Yeah I know if I used the ramrod properly that wouldn't happen.Unfortunately s..t happens.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
5/16" anodized or hard aluminum range rods
- Thread starter roundball
- Start date
Help Support Muzzleloading Forum:
Loading rods and wiping rods....getting sorta complicated? Like to keep things simple...so, just use what rod is on the gun which is always wood and which has always served me well.
Kinda agree that all this complication isn't what was used by our forefathers who were mainly practical people who used their "guns" much more often than people do today. Not trying to "stir the pot"....just joining in on the tangent posts which always appear.....Fred
Kinda agree that all this complication isn't what was used by our forefathers who were mainly practical people who used their "guns" much more often than people do today. Not trying to "stir the pot"....just joining in on the tangent posts which always appear.....Fred
Thanks for the good testimony.
Calling them tomorrow to see if instead of installing any ramrod accessory tip they'll just drill & tap the end of the rod itself...and 10/32" at that, not the usual small 8/32"...don't want to use any step-up adapters.
Calling them tomorrow to see if instead of installing any ramrod accessory tip they'll just drill & tap the end of the rod itself...and 10/32" at that, not the usual small 8/32"...don't want to use any step-up adapters.
Uhm, those can be pretty basic in their finish.Larry P said:
Might be a bit too rough for a rfle barrel and actually cause abrasive like damage when used, :idunno:
Just sayin,,
Hmmmm...... :hmm:
- Joined
- Jan 3, 2013
- Messages
- 20,091
- Reaction score
- 1,018
:rotf: :thumbsup:
roundball said:I hit the mother-lode...
http://www.aramrod.com/ramrods/bench_rods.html[/quote]
Hard, anodized aluminum bench / range rods arrived as scheduled.
Stiff, strong, excellent quality”¦5/16”x 44” with 10/32” ends.
They'll also be wearing 5/16" nylon muzzle guides from ML Builders Supply.
Last edited by a moderator:
Roundball those handles just screw on and don't rotate ...correct?
Strangely that almost looks like a insert as used in an aluminum shaft arrow....Are the inserts pinned? :idunno:
Not sure what you're referring to...the rods themselves are a single one piece rod. If you're talking about what looks like a brass threaded insert inside the handle, I don't see any evidence of a pin...don't know if those brass inserts are glued in or if molten plastic is molded / formed around them or what.smo said:
With the apparent overall attention to detail and quality they seem to have, I'd be surprised if it the handles were a weak spot.
Thanks Roundball, They do look like a great find. :thumbsup: What I was talking about is the end the jag/brush screws into. In the photos above the rod without anything attached appears to have like a threaded insert in the end of it. Are the rods solid or hollow? If they are solid rods and threaded there would be no need to pin them obviously. I just couldn't really tell in the photos. Like I said either way they appear to be a good find and are priced right as well. :thumbsup: Thanks for posting the link.
roundball said:
:redface: :shake: I think I just found the answer to my last question....Thanks again.
Anodizing can turn the exterior any color you can dream of.
Undyed, the aluminum oxide that is created during the process is colorless and translucent. It looks like a dull metal finish.
By adding a dyeing step the color can be added.
Hard anodizing is basically created by slightly modifying the process so that the aluminum oxide builds up to a thicker layer which resists abrasion better.
Hard anodizing is often dyed so it is easy to know the part has been treated.
Undyed, the aluminum oxide that is created during the process is colorless and translucent. It looks like a dull metal finish.
By adding a dyeing step the color can be added.
Hard anodizing is basically created by slightly modifying the process so that the aluminum oxide builds up to a thicker layer which resists abrasion better.
Hard anodizing is often dyed so it is easy to know the part has been treated.
Yes, Google is our friend:
http://en.wikipedia.org/wiki/Anodizing
http://en.wikipedia.org/wiki/Anodizing
Last edited by a moderator:
And about the handles, I have the rods all set up with the different size brushes I wanted to mount and in trying one, realized that with Paul Bunyan hands, the handles are a little smaller than I (personally) like...will Epoxy these larger Palm Savers in place instead.roundball said:
Similar threads
